Advanced Features
Switching between Anynet+ Devices
1. Open the
Tools
menu using your remote, and then select
2. Select a device, and then wait until the switch to the selected device is completed.
✎
The menu appears only when you set
✎
Switching to the selected device may take up to 2 minutes. You cannot cancel the switching operation while
switching is in progress.
✎
If you have selected an Anynet+ device using the
Make sure to switch to an Anynet+ device.
Anynet+
(HDMI-CEC).
Anynet+ (HDMI-CEC)
to
On
Source
function , you cannot use the Anynet+ function.
English - 67
in the
System
menu.