Advertisement
Quick Links
Advertisement
Summary of Contents for TACKLIFE MMD03
- Page 1 User Manual Metal Detector Model: MMD03...
- Page 2 Thank you for purchasing TACKLIFE MMD03 Metal Detector. Please read this user’s manual carefully and thoroughly before operating this equipment. Operating Instructions Adjusting Length Loosen the stem’s lock nut clockwise. Extend the stem as the arrow. Then turn the stem’s lock nut counterclockwise to lock it.
- Page 3 Installing the battery Your metal detector is powered by two AA battery (included). Open the battery cover in the direction of the arrow. Buckle the battery after matching the polarity. Then place the battery into the battery compartment. Battery cover Caution: ●...
- Page 4 Target Identific The detector can distinguish between three categories of metal targets: Ferrous: this includes many iron targets such as nails, screws, bolts and some large iron objects like horseshoes. detector will respond with a low-pitch audio tone and display the icon: Non-ferrous low conductor: this includes US nickels, many rings...
- Page 5 Low Battery Indicator When battery power reaches a low condition the Low Battery icon will illuminate ① . When it first appears there is about an hour of battery life remaining. When battery power is close to failing, the icon will flash ②...
-
Page 6: Backlight On/Off
1 segment: 2 segments: 3 segments: 0-2 inch(0-5cm) target depth 2-4 inch(5-10cm) target depth 4 inch(10cm) or more target depth Objects other than coins will still register on the depth scale, but the depth indication will be relative. For example, all 3 segments illuminat- ed could indicate a coin at 4 or more inches deep, but could also be a very large object much deeper. - Page 7 Pressing DISC again will also eliminate low conductor non-ferrous targets. Pressing DISC a third time will return the detector to the default state and detect all metals. THREE-TONE AUDIO The detector emits a low, medium or high tone, depending on the type of metal detected.
-
Page 8: Quick Use Guide
depth. The speaker volume, along with visual depth indicator, help you determine a target’s depth before you dig. Quick use guide Try this quick way to demonstrate the basic features of your metal detector: I. Supplies Needed a. a nail. b. - Page 9 Eliminating Some Metals Press DISC once. The black block below the left icon will disappear. Wave the nail under the search coil and notice it is no longer detected. Press DISC again. The black block below the middle icon will disappear.
- Page 10 You may want to adjust your discrimination during your search, depending on what you are finding. For instance, if you are searching with all three target categories active, you will detect all types of metal objects. If you find that you are in a trashy area with a lot of iron objects, press the DISC button to eliminate the iron category.
-
Page 11: Care And Maintenance
appliances emit electromagnetic fields, which can interfere with your detector. If conducting an indoor demonstration, keep the searchcoil away from appliances such as microwaves, computers and televisions. If your detector beeps erratically, turn off applianc- es and lights. Do not test by placing coins on the floor. Most floors contain metal. - Page 12 Shenzhen Take Tools Co., Ltd. Web: www.tacklifetools.com Facebook: www.facebook.com/Tacklife.US E-mail: support@tacklife.net ADD: No.B714,Niulanqian Building, Minzhi Road, Longhua District, Shenzhen, Guangdong, China 518000 Made in China...
Need help?
Do you have a question about the MMD03 and is the answer not in the manual?
Questions and answers