Selecting An Effect - Canon Optura S1 Instruction Manual

CAMERA mode:
6. Fade in: Press the start/stop button in record pause
mode.
Fade out: Press the start/stop button in record
mode.
PLAY mode:
6. Fade in: Press the
mode.
Fade out: Press the

Selecting an Effect

Available in the
the mode dial to a mode other than
D.EFFECT OFF
( 51)
1. Press the FUNC. button.
2. Select the digital effect symbol followed by
[ EFFECT].
• The symbol of the current setting is displayed.
• When recording to the memory card only the BLK & WHT
effect is available. Select it and proceed directly to Step 4
below.
3. Select the effect type.
The selected effect will be demonstrated on the current screen and will be shown in a
small animation to the right of the menu item.
4. Press the FUNC. button.
The symbol of the selected effect appears.
5. Press the D.EFFECTS button.
• The symbol turns green, and the effect is activated.
• From the playback pause mode, start playing the tape before
pressing the D.EFFECTS button.
• Pressing the D.EFFECTS button again deactivates the effect.
/ button in playback pause
/ button in playback mode.
, , and
.
modes. When recording, set
E
59