Table of Contents
Advertisement
REBOILING/WARMING (TIMER AND
SAVING MODE)
Reboiling water while
warming
Press the
button
REBOIL
TIMER
once.
: The BOIL indicator will light
up.
[The time range of water reboiling
At the temperature of "98": About 3 - 6 min
[
At the temperature of "85": About 9 - 10 min
[
At the temperature of "60": About 15 - 18 min
[
In the saving mode: Within about 18 min
[
(The amount of water : maximum water/the
room temperature : 20°C)
TIMER MODE
This mode cannot be used at the warming
temperature of "60".
When keeping the
temperature of "98"
or "85", press the
button and the
REBOIL
TIMER
TIMER indicator (
will light up.
: "6" will be displayed as the
hour timer and the
WARM indicator will flash.
The hours remaining until
setting timer is ended will be
displayed by 1 hour.
(In case setting timer while
the water is being boiled,
the WARM indicator will
flash after the water boils.
: The TIMER indicator (
will light off and the
temperature indicator will
display. After that, the water
will be reboiled.
When at the selected warm
temperature, the WARM
indicator will light up
noticeably.
L To cancel the timer
Press the
button once. It will switch to BOIL.
REBOIL
TIMER
NOTE
While in setting timer, selecting the temperature
[
of "60" will cancel the operation.
12
NENL10000000172_EN.indd 12
NENL10000000172_EN.indd 12
REDUCE
EMPTY
CHLORINE
TIMER
CLEAN
SAVE
BOIL
WARM
MODE
REDUCE
EMPTY
CHLORINE
TIMER
CLEAN
SAVE
BOIL
WARM
)
MODE
After about 6 hours
)
REDUCE
EMPTY
CHLORINE
TIMER
CLEAN
SAVE
BOIL
WARM
MODE
SAVING MODE
This mode cannot be used at the warming
temperature of "60".
Press the
button
SAVING
MODE
while in the warming
temperature of "98"
or "85".
: The SAVE MODE
indicator will light up
When getting dark...
REDUCE
EMPTY
CHLORINE
TIMER
CLEAN
SAVE
BOIL
WARM
MODE
: The mode switches
automatically to the
saving mode by
5 seconds and the
WARM indicator will
flash slowly.
(The control panel shows
the warming status.)
L To cancel the saving mode
SAVING
Please press the
button again.
MODE
The SAVE MODE indicator will light off.
∗ In spite of unplugging, the saving mode still
operates until it is cancelled.
L To reboil the water in saving mode
REBOIL
Press the
button once to light up the BOIL
TIMER
indicator.
NOTE
In saving mode, selecting the warm temperature at
[
"60" or setting the timer will cancel the operation.
The save mode cannot be used during timer
[
setting mode.
To return to the saving mode operation
When the pot is moved to another location and the
saving mode does not operate, please follow the
setting procedure below:
1. Cancel the saving mode.
2. Adjust the lightness where the save mode operates.
3. Keep pressing the SAVING MODE button for 5
seconds. When the "bee bee bee" is heard,
release the button. (The setting is complete.)
REDUCE
EMPTY
CHLORINE
TIMER
CLEAN
SAVE
BOIL
WARM
MODE
When getting light...
(The light stays for 4
minutes.)
REDUCE
EMPTY
CHLORINE
TIMER
CLEAN
SAVE
BOIL
WARM
MODE
: The WARM
indicator flashes
rapidly. And at the
selected warming
temperature, the
WARM indicator
will lights the
signal will sound.
9/25/18 9:30 AM
9/25/18 9:30 AM
Hide quick links:
Advertisement
Table of Contents
