Bkr 5000 Configuration Settings - BK TECHNOLOGIES BKR 5000 Pairing Manual

G1 SCBA Radio Pairing Guide |
Step 1. Download, install, and open the latest version of RES (Radio Editor
Software) (BKR0733).
Step 2. Connect the programming cable to the BKR 5000 Radio and the computer.
Step 3. Turn on the BKR 5000 Radio using the volume knob.
Step 4. Wait RES sees the Radio: "Read Radio" will become available under the
"Read / Write" section, then click the "Read Radio" button.
Step 5. Under the "Utilities" section, click the "Feature Editing Software" button.
Step 6. Verify the BKR 5000 is equipped with the Bluetooth Option (BKR0560).
(A) Under the "Hardware Options" section, there should be a check
next to "Bluetooth Enabled".
(B) If the radio does not have the Bluetooth Option available, contact
your radio dealer to upgrade the radio.
Step 7. Under the "Config" section, click the "Menus" button.
Step 8. Under "Menu Items", highlight "Bluetooth".
Step 9. Under the "Read / Write" section, click the "Write Radio" button.
The Radio is now able to control Bluetooth from the menu.
Step 10. Turn the radio off, then back on using the volume knob.
Step 11. Click the "Menu" button
Step 12. Select "Bluetooth" from the menu.
Step 13. If "Bluetooth" is set to "OFF", set it to "ON".
Rev. 12-3-2021
BK Technologies

BKR 5000 Configuration Settings

Contact your radio dealer for instructions and Serial Key
Page 2 of 10