Table of Contents
Advertisement
ACCESSORIES AND HARDWARE
INSTALLATION
Mounting Bracket
(Half Sleeve) × 1
Removable Trim Ring
INSTALLATION
1. BEFORE INSTALLATION
When mounting the unit in a car, keep the unit as level as possible.
If the unit must be mounted at an angle, due to the design of the vehicle, make sure the unit does not tilt by
more than 30°.
max. 30°
Mounting Strap
and Screws
Unlock Levers
× 1
GB–15
Not used
× 1
× 2
Wire harness
× 1
Carrying case
× 1
Advertisement
Table of Contents
