Canon ELURA 80 Instruction Manual page 86

5. Press the AUDIO DUB. button on the wireless
controller.
"AUDIO DUB." and "
6. Press the PAUSE
to begin dubbing.
• Audio device: Begin playback.
• Microphone: Speak into the microphone.
7. Press the STOP
to stop dubbing.
Audio device: Stop playback.
Use only tapes recorded in SP mode 12-bit audio sound with this camcorder.
Audio dubbing will stop if the tape has a blank section or a section recorded in
LP mode or 16-bit mode.
devices to the MIC terminal.
You cannot use the DV terminal for audio dubbing.
If you add sound to a tape not recorded with this camcorder, sound quality may
decrease.
Sound quality may decrease when you add sound to the same scene for more
than 3 times.
You can check the picture on the LCD screen.
When you connect an audio device, check the sound via built-in speaker or
audio device.
When you use a microphone, you can check the picture on a TV connected via
the AV terminal and the sound via headphones connected to the TV.
Set the zero set memory at the end of the scene you wish to dub audio. The
camcorder will automatically stop audio dubbing at that point.
86
" appear.
button on the wireless controller
button on the wireless controller
When using the built-in microphone, do not connect any
PAUSE SLOW
ZERO SET
AUDIO DUB. TV SCREEN
MEMORY
PLAY
STOP
PAUSE SLOW
ZERO SET
AUDIO DUB. TV SCREEN
MEMORY
PLAY
STOP
PAUSE SLOW
ZERO SET
AUDIO DUB. TV SCREEN
MEMORY