Using The Zebra Pattern - Canon DIM-462 Instruction Manual

Using the Zebra Pattern

The zebra pattern is a series of diagonal stripes that appear in the viewfinder to highlight areas of
overexposure. Use it as a guide to set the aperture (iris) and shutter speed.
You can also select the pattern appearance level from 80, 85, 90, 95, and 100%.
Selecting the Zebra Pattern Level
+
TAPE CAMERA
CAM. SET UP
( 20)
1. Open the menu and select CAM. SET UP.
2. Select ZEBRA LEVEL and select the level.
3. Close the menu.
Activating the Zebra Pattern
+
TAPE CAMERA
CAM. SET UP
( 20)
1. Open the menu and select CAM. SET UP.
2. Select ZEBRA LEVEL and set it to ON.
3. Close the menu.
Note:
• The camcorder does not record the zebra pattern, it is only shown in the display.
+
CARD CAMERA
,
ZEBRA LEVEL• 90
+
CARD CAMERA
,
ZEBRA••••••• OFF
E
85