Adjusting The Cutting Height - Toro Super Recycler 21565 Operator's Manual

Adjusting the Cutting Height

DANGER
Adjusting the cutting-height levers could bring your hands into contact with a moving blade
and result in serious injury.
• Shut off the engine and wait for all moving parts to stop before adjusting the cutting height.
• Do not put your fingers under the housing when adjusting the cutting height.
CAUTION
If the engine has been running, the muffler will be hot and can burn you.
Keep away from the hot muffler.
Adjust the cutting height as desired. Set all wheels to the same cutting height
Figure 12
13
(Figure 12).
g369225