Contents 1 Important Safety Compliance Care of the environment Notice 2 Your Docking Speaker Introduction What's in the box Overview of the main unit 3 Get started Connect power Turn on 4 Play Play from iPod/iPhone Play from an external device Adjust volume 5 Specifications Amplifier...
1 Important moving the cart/apparatus combination to avoid injury from tip-over. Safety a Read these instructions. m Unplug this apparatus during lightning storms or when unused for long periods b Keep these instructions. of time. c Heed all warnings. n Refer all servicing to qualified service d Follow all instructions.
(2) this device must accept any interference, product that are not expressly approved by including interference that may cause undesired Philips Consumer Lifestyle may void the user’s operation of the device. authority to operate the equipment. Notice for the USA...
Please visit www.recycle.philips.com for additional information on a recycling center in your area. Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product Notice at www.philips.com/welcome. Introduction “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been...
3 Get started Overview of the main unit Always follow the instructions in this chapter in sequence. Connect power This docking speaker can be powered by either AC power or batteries. Option 1: AC power Caution • Risk of product damage! Make sure that the power supply voltage matches the voltage printed on the bottom of the unit.
4 Play Open the battery compartment. Insert 4 x 1.5V AA batteries with correct polarity (+/-) as indicated. Close the battery compartment. Play from iPod/iPhone 4X1.5V UM3/LR6 You can enjoy audio from your iPod/iPhone through this docking speaker. Compatible iPod/iPhone The docking speaker supports the following iPod and iPhone models: Made for.
Page 8
Launch the app after the installation. Play audio on your iPod/iPhone. » Audio comes out through this docking speaker. Note Follow the on-screen instructions to • With the ClockStudio app, you can enjoy radio, set clock and alarm, adjust sound settings, and update complete the firmware update.
Connect your docking speaker and PC with a USB cable. Launch iTunes to synchronize your docking speaker with PC. » The docked iPod/iPhone is synchronized with PC successfully through the iTunes. Note • Due to different materials and product techniques, some USB cables may not work with this device.
5 Specifications Adjust volume To adjust volume: Amplifier • Press +/- on your docking speaker; or • Adjust the volume control of your iPod/iPhone or external device. Rated Output Power 2 X 5 W RMS General information Power supply Model: - AC Power KSAS0151200150HE;...
If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www. philips.com/welcome). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available.