Canon PIXMA MX870 Series Getting Started page 37

8
Press and hold the WPS button on the access
point (for about 5 seconds), then press the OK
button on the machine within 2 minutes.
For details on the WPS button pressing, refer to the
manual of your access point.
The Wi-Fi lamp (blue) flashes while searching for or
connecting to an access point.
9
When the above screen appears, press the OK
button.
The Setup menu screen returns.
• If the timeout error screen appears, press the OK
button, then start over from .
• If another error appears, refer to the printed
manual: Network Setup Troubleshooting.
10
E
Press the COPY button (E).
The copy standby screen is displayed.
Next, read "12 Install the Software
(Network Connection)" on page 45!
10 Wireless Setup