Page 25
名称和产品中有害物质的含量 Name and content of hazardous substances in products Name and content of hazardous substances in products Name and content of hazardous substances in products Name and content of hazardous substances in products 组 件 有 害 物 质 名 称 H a z a r d o u s s u b s t a n c e s 铅...
1. FUNDAMENTAL SAFETY WARNINGS • The appliance is not intended for use by persons (including children) with reduced phys- ical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• The appliance can be used by persons with reduced physical, sensory or mental capa- bilities or lack of experience and knowledge if they are supervised or have been given instruction concerning use of the appliance in a safe way and if they understand the hazards involved.
4. REGULATORY REFERENCES • The appliance could be damaged if the water it contains freezes. Do not install the appliance in a room where the This product complies with European regulation no. temperature could drop below freezing point. 1935/2004 on materials and articles intended to come •...
B6. Hot water button 2. The light corresponding to the button (B6) comes on button: to customise beverage quantity and the light (B15) flashes to indicate that you need to B8. Mode selector dial: deliver water to fill the circuit (fig. 7); •...
The first time you use the appliance, we recommend using the coffee a number of times before finding the correct adjustment for factory setting (medium grinding) (fig. 14), then if you are not the right amount of coffee. satisfied with the result, adjust the level according to your per- sonal taste and the type of coffee by setting a finer or coarser grinding level, referring to the tips in section "4.5 Adjusting the quantity of ground coffee in the filter".
Page 32
4. Using the dial (B8), select the desired beverage. Coffee Pre- Quantity Filter 5. Press the button. The appliance makes the coffee then infusion stops automatically. Please note: While the machine is making coffee, delivery can 1 cup be interrupted at any moment by pressing the button.
Page 33
Recommended Milk beverage to be 6. Press the button to save the new setting. The appliance position prepared is ready for use again and the button remains on. If you do not want to save the new setting, press any other Hot milk (not frothed) / button.
12.2 Water hardness 6. Replace the connection nozzle, move the ring downwards and put the cappuccino maker back on the nozzle, turning descale light (B9) comes on after a period of time es- it and pushing it upwards until it is attached. tablished according to water hardness.
4. Press the button (B1) to exit the menu. (If the appli- Button Time ance is left idle for about 1 minute, it exits automatically 9 minutes from the settings menu and is ready for use again); 1.5 hours 5. Turn the ground coffee quantity dial (B2) to the "min”...
flow the edge and damage the appliance, the surface it rests on or If still dirty, and in any case always at least once a month, clean the surrounding area. the coffee filters thoroughly: 1. Extract the perforated filter by pulling the tab (fig. 38). 1.
Page 37
13.7 Cleaning the beans container Without extracting it, clean the beans container regularly with a cloth. For more thorough cleaning, proceed as follows: 1. Make sure the beans container (A2) is empty. If necessary, operate the coffee mill without beans to empty it: 2.
Page 38
13.9 Replacing the burrs 13.11 Other cleaning operations When the quantity of coffee becomes even less, contact a cus- 1. Do not use solvents or abrasive detergents to clean the cof- tomer services centre to have the burrs replaced, then adjust the fee maker.
15. TECHNICAL DATA Mains voltage: 220-240V ˜ 50-60Hz Absorbed power: 1450W Size LxDxH: 375x368x445 mm MAX. pressure: 19 bars Water tank capacity: Power cable length: 1200 mm Weight: 12 kg 16. HOW TO MAKE PERFECT COFFEE PERFECT ESPRESSO UNDER-EXTRACTED COFFEE OVER-EXTRACTED COFFEE FROTH: nut-brown coloured with FROTH: clear and thin with large...
17. EXPLANATION OF LIGHTS LIGHTS EXPLANATION OF LIGHTS OPERATION All the lights flash briefly Turning the machine on Self-diagnosis Insufficient water in tank or water tank Fill the tank or extract the tank and put it not inserted correctly back correctly Energy saving is enabled See section "12.5 Energy saving"...
Page 41
LIGHTS ALARM SOLUTION Descaling must be performed Descale the appliance as described in sec- tion "14. Descaling" The dial (B8) is in the descaling position Turn the dial to one of the beverage flashing quickly positions The filter holder has been detached be- Repeat grinding flashing fore grinding has ended or pressing has...
LIGHTS ALARM SOLUTION If the water softener filter (C6) is present, Press the button (B6) corresponding to flashing an air bubble may have been released in- light (fig. 9). Delivery begins side the circuit, obstructing delivery and stops automatically. The grinding is too fine and the coffee is Extract the filter holder and repeat the delivered too slowly or not at all operations to make the coffee, bearing...
Page 43
PROBLEM CAUSE SOLUTION The espresso coffee drips from the The filter holder is inserted incorrectly Attach the filter holder correctly and rotate edges of the filter holder rather than firmly as far as it will go the holes The espresso boiler gasket has lost elas- Have the espresso boiler gasket replaced by ticity or is dirty Customer Services...
Page 44
PROBLEM CAUSE SOLUTION If you want to change the type of coffee You must remove all the beans present • Empty the beans container (if neces- sary, operate the coffee mill without in the machine beans or use a vacuum cleaner to re- move any remaining beans).
Page 45
De’Longhi Appliances via Seitz, 47 31100 Treviso Italia www.delonghi.com...
Need help?
Do you have a question about the EC9335.M and is the answer not in the manual?
Questions and answers