Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for fantastic furniture Havana Dresser 7 Drawer
Summary of Contents for fantastic furniture Havana Dresser 7 Drawer
- Page 1 Version 1.0 Havana Dresser 7 Drawer fantasticfurniture.com.au...
- Page 2 We’re thrilled you’ve chosen Fantastic Furniture to help create a home you’ll love! Love it? Share it! Fantastic buy! Share how it looks at home on Instagram for your chance to win a $250 Fantastic Furniture Gift Card! @fantasticfurniture Page 2 fantasticfurniture.com.au...
- Page 3 Assembly Checklist Read through the instructions carefully Make sure you have all the required tools. before you begin. Never use power tools unless instructed. Unless instructed, do not fully tighten Identify and lay out all of the screws until the item is fully assembled. components before you begin assembly.
- Page 4 What you need Top Panel (P1) to assemble the product Right Side Panel (P3) (P10) Back Panel DO NOT USE (P13) Divider (P4) Other tools you need: Phillips head screwdriver; Divider Hammer Rail (P4) (P9) RF Leg (P12) Rail Divider Parts list (P8) (P5)
- Page 5 Step 1 You will need 12 x Cam Bolts Phillips Head (H3) Screwdriver (P10) (P7) (P9) (P8) Attach 12 x Cam Bolts (H3) into Legs (P7, P8, P9, P10). Step 2 (P9) You will need 4 x Dowels 6 x Cam Nuts (H1) (H4) (P2)
- Page 6 Step 4 You will need 3 x CL Runner 3 x CR Runner Tracks (H6) Tracks (H7) 18 x Small Phillips Head Screws (H5) Screwdriver (P3) (P2) Attach 3 x CL Runner Tracks (H6) to Left Side Panel (P2) with 9 x Small Screws (H5). Attach 3 x CR Runner Tracks (H7) to Right Side Panel (P3) with 9 x Small Screws (H5).
- Page 7 Step 6 You will need 2 x CR Runner 2 x CL Runner Tracks (H7) Tracks (H6) (P4) (P4) FLIP Phillips Head 12 x Small PVC edge Raw edge Screwdriver Screws (H5) Attach 1 x CL Runner Track (H6) to Divider (P4) with 3 x Small Screws (H5). Turn Divider (P4) over to the other side, then attach 1 x CR Runner Track (H7) with 3 x Small Screws (H5).
- Page 8 Step 9 You will need (P6) (P11) 2 x Wooden Phillips Head Screws M4 Screwdriver x 40mm (H17) (P12) Two People Required Attach Rails (P11, P12) to Divider (P6) with 2 x Wooden Screws (H17) using a Phillips head screwdriver. Step 10 (P5) You will need...
- Page 9 (P5) Step 11 You will need (P5) (P11) 4 x Dowels 4 x Cam Nuts (P6) (H1) (H4) (P7) (P12) Phillips Head Hammer Screwdriver (P2) (P9) Insert 4 x Dowels (H1) into Rails (P5, P11, P12). Insert 4 x Cam Nuts (H4) into the holes of Rails (P5, P11, P12). Rotate the cam nuts so the arrows point towards the incoming cam bolts.
- Page 10 Step 13 (P10) (P13) (P12) (P9) Two People Required Carefully turn the cabinet over to an upright position. Slide Back Panels (P13) in through the grooves of Legs (P9, P10) and Rail (P12). Step 14 You will need 10 x Cam Bolts Phillips Head Screwdriver (H3)
- Page 11 Step 15 You will need (P4) (P8) 12 x Dowels (P4) (H1) (P9) (P7) Insert 12 x Dowels (H1) into Side Panels (P2, P3), Dividers (P4) and Legs (P7, P8, P9, P10) as shown. Step 16 (P1) You will need 10 x Cam Nuts Phillips Head (H4)
- Page 12 Step 17 You will need 4 x Wedges 4 x Screws (H15) (H16) (P13) Phillips Head Screwdriver Secure Back Panel (P13) in place with 4 x Wedges (H15) using 4 x Screws (H16). Step 18 H10 H10 You will need (P14) 4 x Small Cam Phillips Head...
- Page 13 (P19) Step 20 (P17) (P18) Slide Smaller Drawer Base (P19) in through the grooves of Drawer Sides (P17, P18). Step 21 (P20) You will need (P17) 4 x Long Phillips Head Screws(H12) Screwdriver (P18) Attach Smaller Drawer Back (P20) to Drawer Sides (P17, P19) with 4 x Long Screws (H12), make sure that the grooves line up the whole way around the drawer.
- Page 14 Step 23 (P14) You will need 2 x Round Head 1 x Handle Bolts (H14) (H13) Phillips Head Screwdriver Attach 1 x Handle (H13) to Smaller Drawer Front (P14) with 2 x Round Head Bolts (H14). Tighten Round Head Bolts using a Phillips head screwdriver. Step 24 (P15, P16) Repeat Step 18 to Step 23 with Samller Drawer Fronts (P15, P16)
- Page 15 Step 26 (P17) You will need (P18) 4 x Small Cam Phillips Head Nuts (H11) Screwdriver (P21) Insert 4 x Small Cam Nuts (H11) into the holes of Drawer Sides (P17, P18). Rotate the cam nuts so the arrows point towards the incoming cam bolts. Attach Drawer Sides (P17, P18) with Larger Drawer Front (P21), and then tighten the cam nuts.
- Page 16 Step 29 (P18) You will need 1 x DL Runner 1 x DR Runner (H8) (H9) (P17) 4 x Small Phillips Head Screws (H5) Screwdriver Attach 1 x DL Runner (H8) to the bottom of Left Drawer Side (P17) and 1 x DR Runner (H9) to the bottom of Right Drawer Side (P18) with 4 x Small Screws (H5).
- Page 17 Step 32 (P14) (P15) (P16) (P21) (P22) (P21) (P22) Slide 7 x drawers into the Dresser as shown. We strongly advise that you use Step 33 the wall safety strap provided to prevent the unit toppling You will need 1 x Safety 1 x Screw (P1) Strap (H19)
- Page 18 Seek advice from a qualified Step 34 trades person on how to attach this safety strap to You will need your specific wall. wall 1 x Washer Phillips Head Screwdriver (H18) Screw and Wall Plug Screw are not provided. Please use appropriate fixtures for your wall.
Need help?
Do you have a question about the Havana Dresser 7 Drawer and is the answer not in the manual?
Questions and answers