4. Selecting programme settings
Selecting Extras
Freshen up
Anti-crease
Touch a sensor control to select the
desired Extra.
The relevant sensor control will light up
brightly.
Freshen up and Gentle tumble cannot
be combined, see "Extras" for further
information.
Delay start/SmartStart
Delay start
With Delay start you can delay the
start of a programme.
This function is active when the
is switched off.
SmartGrid
The hours can be set from
The minutes can be set in 15 minute
increments from
34
Gentle tumble
Buzzer
00
to
24
to
.
00
45
Setting the Delay start time
Touch the sensor.
The following will appear in the display:
Start in
Set the hours with the sensors.
Confirm with the OK sensor.
The display will change:
Start in
Set the minutes with the sensors.
Confirm with the OK sensor.
Useful tip: The values will count
upwards and downwards automatically
if you keep your finger on the or
sensor control.
Altering Delay start
The selected Delay start time can be
.
changed before the programme starts.
Touch the sensor.
Change the specified time and
confirm with the OK sensor.
Cancelling Delay start
The selected Delay start time can be
cancelled before the programme starts.
Touch the sensor.
The selected Delay start time will
appear in the display.
Set a time value of
sensors. Confirm with the OK
sensor.
00
:00
h
06:
45
h
00:00 h
with the
OK
OK