Entering Diagnostics; Diagnostic Test Modes; Run One Test - Kurzweil PC2 Series Service Manual

Diagnostics

Entering Diagnostics

Entering Diagnostics
1. Apply power to the unit. When the
2. Press either the Left or Right cursor button until
3. Press the Enter button.
4. The LCD displays the following:
5. Press Enter to select the run one test mode. To select the run burn-in test mode, press

Diagnostic Test Modes

Run One Test

Run One Test allows you to select an individual test, or to step through and run each available
test. To step through the different tests, use the Left or Right cursor button. Press the Enter
button to select the test.
Figure 2-3
2-2
quickly press and release the Panic button for PC2 keyboard units or the Edit button for
PC2R rack units. The LCD should display the following:
Main menu
Install engine
Figure 2-1 LCD example, entering diagnostics
Main menu
Run one test
Figure 2-2 LCD example, diagnostic main menu
either the Left or Right cursor button then press the Enter button to begin the tests.
Select test to run
ROM test
LCD example, Run One Test
message appears in the LCD,
Please wait...
Run diagnostics
appears in the LCD.