Sharp LC-60LE650U Service Manual page 81

12. Software version
1. Main microprocessor
OKLA_LE857_xxx.USB
OKLA_LE857_xxx.DAT
OKLA_LE857_xxx_CHK.USB
OKLA_LE857_xxxxxxxx.PCC
2. Monitor microprocessor
OKLAMxxx.SMB
3. T-CON ROM
• LC-60/70LE650U/LE657U/C6500U
CLOVER_CMB_2012100942554406_37BA603.ROM
• LC-60LE755U/LE857U/LE757U/C7500U
PRIMROSE_CMB_601F8(YS2)_2012100330440002_3FAAEBD.ROM
• LC-70LE755U/LE857U/LE757U/C7500U
PRIMROSE_CMB_701FC(YS2)_2012100330550004_3B59E6E.ROM
CLOVER_CMB_2012100942554406_37BA603.ROM
• LC-80LE657U/LE650U/C6500U
PRIMROSE_CMB(G281)_2013022842667701_485BCD3.ROM
13. Writing the inch and model name onto EEPROM
LE650U/C6500U,LE657U
1. Enter the adjustment process mode.
2. Point the cursor to [MODEL NAME] (Page 29/29).
3. Select "LE650U" or "C6500U" or "LE657U", and press [Enter] key.
4. "OK" is displayed.
5. Point the cursor to [PANEL SIZE] (Page 29/29).
6. Select "60" or "70" or "80" and press [Enter] key.
7. Moments later image is displayed.
8. Turn off power
9. Turn on power
LC-60/70/80LE650U/LE657U/C6500U/LE757U/LE857U,60/70LE755U/C7500U
5 – 18