SISTEMA TWIST 'N' SIP Cleaning Instructions

TWIST 'N' SIP
330ml, 460ml and 620ml TWIST 'N' SIP
VERSION 1 OR VERSION 2?
the bottles, version 2 has 'V2' or a slot/groove engraved on
the base of the bottle and a thumb groove on the lid.
slot/groove
2.1
2.1 The bottle nozzle is held in place by two clips; push in
the sides of the inner lid cover while pulling the nozzle to
remove from the lid cover.
remove from bottle.
4.0
4. Ensure all components of bottle and lid are completely
dry before reassembling. When reinserting nozzle into lid
cover ensure rail and guide markers line up as shown.
Please visit the Sistema website for more information and
www.sistemaplastics.com
Cleaning Instructions
™
To tell the difference between
V2
thumb groove
2.2
2.2
Unscrew the lid base and
Bottle - VERSION 2
™
1.0
1.
With nozzle open locate groove on lid base, and using this
groove place fingernails under the lid cover. Pull to remove
lid cover and nozzle from lid base/bottle.
NB; If having difficulty removing lid cover try soaking the
lid in warm water for a few minutes first.
3.1
3.1 Wash all bottle and
lid components in the
dishwasher (top rack only).
or...
5.0
5. While holding down the nozzle (ensuring the nozzle and
lid cover are held together tightly), TWIST the lid cover onto
the lid base clockwise. Press down to click the lid cover into
place. Check cap function by twisting the cap cover anti-
clockwise to open the nozzle. Enjoy!
cleaning videos.
3.2
OR
3.2 Hand wash all bottle and
lid components with hot soapy
water. Clean the bottle base
with a bottle cleaning brush.