Table of Contents
Advertisement
List of Commands
* r...Right panel operation, l...Left panel operation
Command
Abbreviation
arg1
state
st
r/l
-
framerate
fr
60/72
-
directmode
dm
on/off
time
tm
-
count
cnt
-
version
ver
-
name
nm
-
serialnumber
sn
-
-
brightness
br
(NONE)/l/r
None
all/now
preset
pr
num
num
ocm
None
(NONE)/l/r
reset
rst
-
dfu
-
-
powerswitch
pwrsw
-
power
-
pwr
on/off
arg2
arg3
arg4
Output
-
-
-
STATE_CONNECTING
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
0 - 100/+/-
-
-
-
-
-
-
-
-
l/r/n/all
0 - 100
0 - 100
NAME
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Description
You can get the status of each panel.
STATE_NONE: The power switch is off.
STATE_NONE
STATE_WAITCABLE: The power switch is ON and the DisplayPort
STATE_WAITCABLE
cable is not connected.
STATE_CONNECTING: The DisplayPort cable is connected and
STATE_NORMAL
waiting for the connection to stabilize.
STATE_NORMAL:The connection with the DisplayPort cable is
stable.
60/72
Shows the current refresh rate settings.
-
Change the refresh rate settings.
Shows the current NVIDIA Direct Mode settings.
off/on
off : Direct Mode Off
on : Direct Mode On
Change the NVIDIA Direct Mode settings.
-
off : Direct Mode Off
on : Direct Mode On
Displays the panel display time.
12h34m
Over 60,000 hours will be displayed as 60000h +.
Displays the number of times the power is turned on.
123
It is displayed as 5000000+ after 5 million times.
ver.0.0.0
Displays the HMD-VS1W firmware version.
HMD-VS1W
Displays the product name.
00000000
Shows the serial number.
l:100 r:100
Displays the brightness.
Change the brightness.
You can specify the brightness by entering a numerical value (0 to
100).
-
You can increase / decrease the brightness by 1 with +/-.
Perform the same operation on the left and right without specifying
l / r.
0 - 4
Displays the preset number being set.
num:NUM
Displays preset information.
br_L: 0 - 100
all:View information for all presets.
br_R: 0 - 100
now: Display information about presets being set.
Name:NAME
Display the preset specified by the argument "num" (1-4).
num:NUM
l: Left panel brightness is displayed.
br_L: 0 - 100
r:Left panel brightness is displayed.
br_R: 0 - 100
n:Display preset name.
Name:NAME
all:Show all of the above.
Sets the preset specified by the argument "num" (1-4).
arg2: Brightness (left)
None
arg3: Brightness (right)
arg4: Preset name
Displays the firmware version of the DP-mipi conversion chip.
-
Show both panels without l or r.
-
Initialize preset settings, refresh rate, and Direct Mode set
-
Reboots in the DFU Mode (mode for updates).
Off/On
Indicates the status of the power switch (Off/On).
off/on
Indicates the status of the power (Off/On).
-
For switching the power to On/Off.
33
Advertisement
Table of Contents
