Table of Contents
Advertisement
2
On your device that supports Advanced
Audio Distribution Profile (A2DP), enable
Bluetooth and search for Bluetooth devices
that can be paired (refer to the user
manual of the device).
3
Select 'Philips BTB1370' on your
Bluetooth enabled device, and if necessary
input '0000' as the pairing password.
» After successful pairing and connection,
the Bluetooth indicator turns solid
blue, and the unit beeps.
» 'CONNECTED' is displayed.
4
Play music on the connected device.
» Music streams from your Bluetooth
enabled device to this unit.
•
If you fail to search for 'Philips
BTB1370' or cannot pair with this
unit, press and hold
seconds until the Bluetooth indicator
flashes quickly to enter pairing mode.
To disconnect the current Bluetooth-enabled
device:
•
Deactivate Bluetooth on your device; or
•
Move the device beyond the
communication range.
Pair and connect a second device
You can pair and connect up to two Bluetooth-
enabled devices to this unit at the same time.
To connect and play from a second Bluetooth-
enabled device
1
Press and hold
until the Bluetooth indicator flashes quickly
to enter pairing mode.
2
Pair and connect a second device to this
unit.
3
Play music from either connected device.
•
To play from the other connected device,
first stop music streaming from the current
device.
•
To disconnect the first connected device,
press and hold
until the Bluetooth indicator flashes quickly
to enter pairing mode.
EN
12
/PAIRING for 3
/PAIRING for 3 seconds
/PAIRING for 3 seconds
Advertisement
Table of Contents
