Bosch GBH 24 VFR Professional Original Instructions Manual page 19

OBJ_BUCH-372-001.book Page 19 Tuesday, July 24, 2007 1:31 PM
When working with the machine, always
hold it firmly with both hands and provide
for a secure stance. The power tool is guided
more secure with both hands.
Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held
more secure than by hand.
Do not work materials containing asbestos.
Asbestos is considered carcinogenic.
Take protective measures when dust can
develop during working that is harmful to
one's health, combustible or explosive. Ex-
ample: Some dusts are regarded as carcino-
genic. Wear a dust mask and work with
dust/chip extraction when connectable.
Keep your workplace clean. Blends of mate-
rials are particularly dangerous. Dust from
light alloys can burn or explode.
Always wait until the machine has come to
a complete stop before placing it down. The
tool insert can jam and lead to loss of control
over the power tool.
Avoid unintentional switching on. Ensure
the On/Off switch is in the off position be-
fore inserting battery pack. Carrying the
power tool with your finger on the On/Off
switch or inserting the battery pack into
power tools that have the switch on invites
accidents.
Do not open the battery. Danger of short-
circuiting.
Protect the battery against heat, e. g.,
also against continuous sun irradia-
tion and fire. There is danger of explo-
sion.
Functional Description
Read all safety warnings and all in-
structions.
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
Bosch Power Tools
Intended Use
The machine is intended for hammer drilling in
concrete, brick and stone. It is also suitable for
drilling without impact in wood, metal, ceramic
and plastic. Machines with electronic control
and right/left rotation are also suitable for
screwdriving and thread cutting.
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
10 Battery charge-control indicator
11 Battery*
12 Auxiliary handle
13 Depth stop
14 Battery release button*
15 Protection cap for battery
16 Securing screw for key type drill chuck*
17 Key type drill chuck*
18 SDS-plus adapter shank for drill chuck*
19 Quick change keyless chuck (GBH 24 VFR)
20 Front sleeve of the quick change keyless
21 Retaining ring of the quick change keyless
22 Universal bit holder with SDS-plus shank*
*The accessories illustrated or described are not in-
Failure to follow the
cluded as standard delivery.
1 SDS-plus tool holder
2 Dust protection cap
3 Locking sleeve
4 Lock ring of the tool holder (GBH 24 VFR)
5 Button for depth stop adjustment
6 Selector switch for drilling/hammer drilling
7 Rotational direction switch
8 On/Off switch
9 Button for charge-control indicator
chuck (GBH 24 VFR)
chuck (GBH 24 VFR)
1 619 929 740 | (24.7.07)
English | 19