Page 5
English SUB-COMPACT DRILL/DRIVER DCD701M Congratulations! Definitions: Safety Guidelines You have chosen a D WALT tool. Years of experience, thorough The definitions below describe the level of severity for each product development and innovation make D WALT one of the signal word. Please read the manual and pay attention to most reliable partners for professional power tool users.
English Safety Instructions for All Operations Your D WALT charger is double insulated in accordance with IEC60335; therefore no earth wire • Hold power tool by insulated gripping surfaces, when is required. performing an operation where the cutting accessory or If the supply cord is damaged, it must be replaced by a the fastener may contact hidden wiring.
Page 7
English * The red light will continue to blink, but a yellow indicator light • Do not use an extension cord unless it is absolutely necessary. Use of improper extension cord could result in risk will be illuminated during this operation. Once the battery pack of fire,electric shock, or electrocution.
Page 8
English Transportation The battery pack is not fully charged out of the carton. Before using the battery pack and charger, read the safety instructions WARNING: Fire hazard. Transporting batteries can below. Then follow charging procedures outlined. possibly cause fire if the battery terminals inadvertently come in contact with conductive materials.
Page 9
English • Take the time to thoroughly read and understand this manual prior to operation. Read instruction manual before use. Markings on Tool The following pictograms are shown on the tool: See Technical Data for charging time. Read instruction manual before use. Wear ear protection. Do not probe with conductive objects.
English ASSEMBLY AND ADJUSTMENTS Installing a Bit or Accessory into a Keyless Chuck (Fig. D) WARNING: To reduce the risk of serious personal injury, turn tool off and disconnect battery pack WARNING: Do not attempt to tighten drill bits (or before making any adjustments or removing/ any other accessory) by gripping the front part of the installing attachments or accessories.
English Variable Speed Trigger and Forward/Reverse Performing an Application (Fig. A) Control Button (Fig. A) WARNING: To reduce the risk of personal injury, ALWAYS ensure workpiece is anchored or clamped firmly. The drill is turned on and off by pulling and releasing the WARNING: Always wait until the motor has come to variable speed trigger ...
English Protecting the Environment DO nOT DEPREss TRiggER sWiTCh On AnD OFF in An ATTEMPT TO sTART A sTAllED DRill—This Separate collection. Products and batteries marked CAn DAMAgE ThE DRill. with this symbol must not be disposed of with normal To minimize stalling or breaking through the material, household waste.