Using ESC/VP21 Commands
You can control the projector from an external device using ESC/VP21.
g g Related Links
• "ESC/VP21 Command List"
p.116
• "Cable Layouts"
p.116
• "List of Functions"
p.10
ESC/VP21 Command List
When the power ON command is transmitted to the projector, the power
turns on and it enters warm-up mode. When the projector's power has turned
on, a colon ":" (3Ah) is returned.
When a command is input, the projector executes the command and returns a
":", and then accepts the next command.
If the command being processed terminates abnormally, an error message is
output and a ":" is returned.
The following commands are available.
Item
Power On/Off
On
Off
Item
Signal selection
A/V Mute On/Off
Add a Carriage Return (CR) code (0Dh) to the end of each command and
Command
transmit.
PWR ON
Contact Epson for more details.
PWR OFF
Cable Layouts
Serial connection
• Connector shape: D-Sub 9-pin (male)
• Projector input port name: RS-232C
• Cable type: Crossover (null modem) cable
Computer1
Auto
RGB
Computer2
Auto
RGB
HDMI1
HDMI2
Video
USB Display
USB
LAN
Screen Mirroring
On
Off
116
Command
SOURCE 1F
SOURCE 11
SOURCE 2F
SOURCE 21
SOURCE 30
SOURCE A0
SOURCE 41
SOURCE 51
SOURCE 52
SOURCE 53
SOURCE 56
MUTE ON
MUTE OFF