Appendix E. Errors And Warnings - Sigicom INFRA C22 Manual

Appendix E. Errors and Warnings

The table below lists some of the errors and warnings:
Code
Error/warning text
E10 Battery level low
E11 Battery level critical
E12 Battery level empty
E14 Battery imbalance
E16 Battery temperature high
E18 Battery is missing
E19 Backup battery low
E43 Sensor test error
E81 Monitoring started automatically
E86 Instrument alignment incorrect
E90 Real-time clock not synchronized
E91 Real-time clock poorly
synchronized
E100/1 Temperature alarms
E102 Instrument humidity warning
12
Is set if instrument time differs two seconds or more from correct time,
see section 5.8.3
Copyright © Sigicom AB 2021
Comment/tip
Charge the battery
Charge the battery
Charge the battery
No problem, will balance out.
Contact Sigicom Support
Check that both batteries are
installed
Contact Sigicom Support
Check that the instrument is
correctly aligned. If it is, contact
Sigicom Support.
After instrument reboot
The instrument shall be mounted
horizontally
Check instrument clock
Check instrument clock and set if
it differs two seconds or more.
Cool down the instrument
Check that all screws of the
instrument lid are tightened
12
52