Figure 2-12: Pso External Sync Input; Table 2-16: Pso External Sync Specifications - Aerotech Automation1 GL4 Hardware Manual

GL4 Hardware Manual
You can use the external PSO synchronization functions [A3200: PSOOUTPUT PULSE EXTSYNC
command] to synchronize waveform generation with an external synchronization signal. When you
activate this feature, the PSO Waveform module will not generate the configured waveform when an
output event is received until the rising edge of the synchronization signal occurs.
Table 2-16: PSO External Sync Specifications
Specification
Voltage
Frequency
On Time
www.aerotech.com
25 MHz Maximum
Figure 2-12: PSO External Sync Input
2.4. Encoder Output Connector
Value
3.3 VDC
20 ns Minimum
37