Working with other ZigBee devices by connecting to ZigBee Minihub via ZigBeenetwork. Easy turn on/off your lights by just a simple tap the LAMPTAN HOME App on your smart phone or tablet, no matter where you are. Important Safety Information 1.
2. A slotted screwdriver and a Philips head screwdriver. 3. A circuit tester. 4. iOS or Android smart device and a Wi-Fi network connection with a router. 5. The "LAMPTAN HOME" App download to your smart device and register your account.
Installation Instruction 1. Turn off power at the circuit breaker that controls the switch before installation. It is recommended to use a circuit tester to make sure the circuit is off. 2. Open the switch panel with slotted screwdriver. Neutral Load Line 3.
Page 15
4. Double –check to confirm wirings are correct and no wire is bare. 5. Place the switch into wall and mount the screws from the existing switch. 77mm. 45mm. 77mm. 6. Press the switch panel onto the snap plate.
Page 16
1. Turn on power, the flashing LED lights show that the switch is in a state of pairing. 2. Open the LAMPTAN HOME app and add your smart device step by step through the LAMPTAN HOME app. (Choose Switch and Outlet when add product in App) 3.
Restore Factory Settings Press any button on switch four times continuously, and hold on when pressing the fifth time until the blue led light blinks quickly. Then press any button again after 5 seconds to get into pairing state. Warranty and after-sales service 1.
Need help?
Do you have a question about the CLASS 1 and is the answer not in the manual?
Questions and answers