Start To Use; Power On/Off; Battery Charging - Philips VoiceTracer VTR5080 User Manual

4 Start to Use

4.1 Power On/Off

Note
• Please recharge the device for half an hour before using it
for the first time!
Power On: turn the switch up to "ON", the translator will
announce "Power on" in voice, that is, successful power on.
Power Off: turn the switch down to "OFF", the translator
will announce "Power off" in voice, that is, successful power
off.
As shown as figure below:
ON
OFF
Hint
• make sure the device is not out of electricity.
26 EN

4.2 Battery Charging

Connect the USB cable to the translator.
The red LED will be on during charging.
The blue LED will be on if the device is fully charged.