Advertisement
1
2
3
4. MAINTENANCE
4.1.
To change the battery on the detector, slide the cover off as shown in fig.7, replace the battery and cover.
4.2.
To change the battery on the transmitter, remove the four screws on the rear of the unit (fig.5) and remove the back cover (fig.6).
Replace the battery and the back cover, ensuring that the small cut out for the switch is at the switch end.
4.3.
If the detector and transmitter are not used for long periods of time, remove the batteries.
4.4.
Store the kit in its case and keep it in a dry safe childproof location.
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of
products containing batteries (as defined within these regulations), that they are registered with Valpak's registered compliance
scheme. Jack Sealey Ltd's Batteries Producer Registration Number (BPRN) is BPRN00705
Environmental Protection.
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a
recycling centre and disposed of in a manner which is compatible with the environment.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this equipment.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
© Jack Sealey Limited
4
5
6
7
fig.1
Screws
fig.5
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
Sensitivity Control
Headphones
Volume
Control
fig.3
Cut out
fig.6
01284 757500
01284 703534
fig.2
fig.4
fig.7
www.sealey.co.uk
sales@sealey.co.uk
PP4.V2 Issue No: 2(L) - 08/01/14
Advertisement
