Charcoal portable barbecue with fan assisted air flow (11 pages)
Summary of Contents for Fire Mountain EVEREST 3 BURNER GAS BBQ
Page 1
FIRE MOUNTAIN 3 BURNER EVEREST GAS BBQ Model Number: EL- 1103TWHK-A SAP Code: JB03710401 ASSEMBLY INSTRUCTIONS 0063 FOR OUTDOOR USE ONLY PLEASE READ INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY RETAIN THIS MANUAL FOR FUTURE REFERENCE...
USE ONLY THE HOSE AND HOSE CONNECTOR PROVIDED If a replacement is necessary, please contact either our Customer Service Department or your local dealer. The use of unauthorised parts can create unsafe conditions and environment. FOR YOUR SAFETY: WARNINGS: • The appliance is designed for outdoor use only. •...
• Do not use this appliance for any other use than the one for which it is dedicated to. • A regulator complying with the inforce national norm will have to be connected to the gas tank in order to obtain the appropriate gas pressure. •...
Page 4
Read the following instructions carefully and be sure your barbecue is properly installed, assembled and cared for. Failure to follow these instructions may result in serious bodily injury and/or property damage. If you have any questions concerning assembly or operation, consult your dealer or LPG Gas Company.
Warning: -Gas cylinder shall not be placed under the side burner/hob/hotplate during operation. -Keep the gas cylinder at least 500mm away from barbecue during operation. -Keep one flexible gas hose straight and not touching any hot surface during operation. 1. The appliance must be installed 1 meter min. from any flammable materials. 2.
Storage of an appliance indoors is only permissible if the cylinder is disconnected and removed from the appliance. When the appliance is not to be used for a period of time it should be stored in its original packaging and stored in a dry dust free environment.
ONLY USE THIS BARBECUE OUTDOORS. BEFORE USE CHECK FOR LEAKS Never check for leaks with a naked flame, always use a soapy water solution LEAKING TEST: Leak test each time a new gas tank is connected or after a long period without having used the appliance.
Push down A control knob and turn it anti-clockwise to the big “ ” position, a click will be heard, this will light the burner. If not repeat this process 3 or 4 times. If the burner has not lit, wait 5 minutes and repeat step 4. When the burner is alight, repeat step 4 and 5 to light other burners.
PLASTIC SURFACES Wash with a soft cloth and hot soapy water solution. Rinse with water. Do not use abrasive cleaners, degreasers or a concentrated barbecue cleaner on plastic parts. WOODEN SURFACES Wooden surfaces should be wiped with a damp cloth. For stubborn marks wipe with a detergent solution.
Before the first use of your appliance, preheat for 15 minutes at full power. Some smell may occur. 3. Cooking In order to avoid the possible smokes that can be emitted during the cooking, remove fatty parts before cooking. Make sure that greasy juices do not accumulate on the appliance. In the event of a greasy fire, do not use water to extinguish, it may damage the burners ;...
3. If you smell gas : (1) turn off the gas tank valve, (2) extinguish all the open fires, (3) open the lid/the hood, (4) and proceed to leak test, (5)If odour continues, please contact your LPG supplier. 4. Warning: some accessible parts may be very hot, use heat resistant gloves when handling hot parts.
Page 21
If you wish to return your product for a full refund the item must be unused, in its original packaging and returned in a sellable condition. Please contact our Customer Service team within 24 hours who will be able to assist with your enquiry If they advise you to return the product to us please pack it carefully and include a note with your name, address, daytime telephone number and...
Need help?
Do you have a question about the EVEREST 3 BURNER GAS BBQ and is the answer not in the manual?
Questions and answers