Audia Flight FL CD THREE S User Manual
  1. Manuals
  2. Brands
  3. Audia Flight Manuals
  4. Turntable
  5. FL CD THREE S
  6. User manual

Audia Flight FL CD THREE S User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
FL CD THREE S Player
User manual
UK rel. 1.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FL CD THREE S and is the answer not in the manual?

Questions and answers

Summary of Contents for Audia Flight FL CD THREE S

  • Page 1 FL CD THREE S Player User manual UK rel. 1.0...

  • Page 2: Dear Customer

    Audia Flight congratulates you and thanks you for choosing one of its products to make your sound system. The FL CD THREE S CD Player and DAC has been patiently designed with the intention of being one of the best player and D/A converter available on the today's market in its price range. This...

  • Page 3: Output Connections

    Location Choose a location that can support the weight of your device. Its operating principle of dissipating heat allow a space of 10 cm around the player so that its ventilation could happen naturally. Move it away from sources of heat or vibration ; do not expose it directly to sunlight. Do not locate the unit close to electroluminescent light sources since they can cause troubles with the remote control working.
  • Page 4 Inputs connection Please, make sure that the unit is turned off or unplugged from the main power supply before making connections. If it is equipped with the rear options panel, your player gives access ti its internal converter to 5 digital inputs. Input Name Input type Specifications...
  • Page 5 The player will try to read the TOC of the CD ….. ….and will inform if there is no disc: When pressing again the «ON» key of the front panel or the «ST-BY» key on the remote control, the LED light again in amber colour and the unit return in standby state indicated by : Playing a CD To play a CD, press the OPEN button on the front panel, place the CD with the label side up on the tray and press again the OPEN to close the drawer.

  • Page 6: Remote Control

    Remote control You will find the remote control in the accessories box with a screwdriver and the battery. The battery is lithium button 3V, CR2032 type. To place the battery, remove the bottom of the case by loosening the 3 screws with the provided tool and insert the battery in its compartiment while observing the correct polarity : + pole upside.
  • Page 7 DIM (Dimmer) and + or – : to select one of the 3 screen brightness levels (« 2 » is maximum and « 0 » is minimum, the screen is then off ) PH : press on this key to revese the phase of signal (PH–); a second press restores the phase (PH) + / –...
  • Page 8 Mode SET NAME INPUT By this first function of the menu, you can rename each of the 5 digital inputs, preset from DIGIT 1 to DIGIT 5, on up to 8 characters. CD player mode is named CD PLAYER et cannot be changed. Upon entering this mode by pressing SET key, a digital input is showed.
  • Page 9 Here is a table to illustrate the differences between the 6 PCM filters : Mode SET DSD FILTER By this function you can choose the filter applied to the DSD stream on the DIGIT 5 (USB input )only. Two filters are available and act in the analogic domain after the conversion : LOW (roll-off at 39 kHz and soft slope ) ou HIGH (roll-off at 76 kHz and sharp slope).
  • Page 10 Upon entering this mode, the display shows automatically the USB input (DIGIT 5) on the first line and DSDDIRECT with YES or NO blinking on the second line. Press SET key to confirm otherwise press + or – keys to select the opposite instruction. Validation is effective when the display stops blinking and after fews seconds without instructions.
  • Page 11 Upon entering this mode the display shows on the second line CONFIRM? with YES or NO blinking. You can select the choice or its opposite by pressing + or – keys. Validation after few seconds when the display stops blinking. Mode SOFTWARE CD3S/DACS This last mode informs you of the software version of the CD player and by pressing SET key, of...

  • Page 12: Listening Tips

    Listening tips Even if the player has already been run for fifty hours, during which operations and tests have been successfully passed, we advise you to continue for two hundreds hours, provided that the running occurs in presence of a CD or a signal. During a long period of disuse, the complete extinction by the switch on the rear panel is recommended.

Table of Contents

Save PDF