Conveying Condensable Vapours; Maintenance - BUSCH R5 ATEX Instruction Manual

7 | Maintenance

6.1 Conveying Condensable Vapours

START
* not included in the scope of delivery
** may be considered as optional on certain products
7 Maintenance
24 / 40
Water vapour within the gas flow is tolerated within certain limits. The conveyance of
other vapours shall be agreed upon with Busch.
If condensable vapours are to be conveyed:
• Close the isolation
valve* and
open the gas ballast
valve** (GB)
END
WARNING
Machines contaminated with hazardous material.
Risk of poisoning!
Risk of infection!
If the machine is contaminated with hazardous material:
• Wear appropriate personal protective equipment.
CAUTION
Hot surface.
Risk of burns!
• Prior to any action requiring touching the machine, let the machine cool down first.
WARNING
The paint thickness can be built up by electrostatic charge.
Risk of severe injury!
Risk of explosion!
• Wipe the machine surface with a damp cloth only!
NOTICE
Using inappropriate cleaners.
Risk of removing safety stickers and protective paint!
• Do not use incompatible solvents to clean the machine.
30 minutes
• Warm up the machine
30 minutes
• Close the gas ballast
valve
0870572240_RA0400-0630C_Ex_-0011_IM_en
• Open the isolation
valve and perform the
process
• Close the isolation
valve