oticon ConnectClip Teachers Manual

oticon ConnectClip Teachers Manual

Hide thumbs Also See for ConnectClip:

Advertisement

ConnectClip
Teacher's guide to the wireless microphone
By wearing the ConnectClip microphone, you will be sending your
voice directly to your student's hearing aids. The student is able
to use ConnectClip for other purposes such as connecting to the
phone and streaming music.
ConnectClip has two indicator lights: A status indicator which,
when the microphone mode is ON, should be magenta and
a power indicator which should always be green.
To be able to switch to the microphone mode, ConnectClip
must be paired with and in range of the hearing aids
(20 metres or 65 feet).
• Press the multi-button in the centre for 3 seconds, until
1
Power
• When the status indicator on the left shows steady yellow or blue,
on
2
• Press the multi-button for 3 seconds, until the status indicator
Microphone
mode
• To MUTE the ConnectClip microphone, press the multi-button for
3
Mute/
• To UNMUTE, press the multi-button for 3 seconds, until the status
Unmute
4
• Turn ConnectClip off by pressing the multi-button for 6 seconds,
Power
off
Summary
Power indicator
Status indicator
the power indicator on the right shows steady green
ConnectClip is paired with the hearing aids
shows steady magenta
3 seconds. The status indicator changes to steady yellow or blue
indicator shows steady magenta again
until both the power indicator and the status indicator are off
When indicator lights are MAGENTA and GREEN
student's hearing aids. If indicator lights are YELLOW and GREEN
your voice is NOT being sent to your student's hearing aids
Description
Steady green
Power on
Fading green
Charging complete (ConnectClip on)
Blinking green
Charging (ConnectClip on)
Blinking orange
Charging (ConnectClip off)
Steady orange
Charging complete (ConnectClip off)
Steady red
Battery low
Description
Blinking yellow
Searching for hearing aids
Steady yellow
Connected to hearing aids
Steady blue
Connected to hearing aids AND a mobile phone
Blinking magenta
Microphone reconnecting
Steady magenta
Microphone mode
Status indicator
Power indicator
Multi-button
Volume up
Volume down
Charging socket
ConnectClip is sending your voice to your
(or BLUE and GREEN
Rotating clip
Microphone
MUTE
UNMUTE
)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ConnectClip and is the answer not in the manual?

Questions and answers

Summary of Contents for oticon ConnectClip

  • Page 1 By wearing the ConnectClip microphone, you will be sending your voice directly to your student’s hearing aids. The student is able Power indicator to use ConnectClip for other purposes such as connecting to the phone and streaming music. Multi-button ConnectClip has two indicator lights: A status indicator which, when the microphone mode is ON, should be magenta and a power indicator which should always be green.
  • Page 2 • Charging time for full charging is 2 hours. A quick 1 hour charge during a break should provide approximately 2.5 hours of use. • When recharging the ConnectClip, use the supplied original power supply 5.0V/1A or USB charger cable • You can easily leave the ConnectClip in the charger for longer, for example overnight, as it will not overcharge oticon.global...

Table of Contents