Servicing The Lenticular Screen And Fresnel Lens; Lenticular Screen And Fresnel Lens Removal - Mitsubishi Electric WS-48511 Service Manual

Projection television v21, v21+, v21++ chassis
Table of Contents

Advertisement

MODELS: WS-48511 / WS-55511 / WS-55711 / WS-65511 / WS-65611 / WS-65711 / WS-65712 / WS-73711 / WS-B55

SERVICING THE LENTICULAR SCREEN AND FRESNEL LENS

CAUTION: Wear gloves when handling the Lenticular Screen and Fresnel Lens.
This prevents cuts and finger prints. Do not place Fresnel Lens in the sun.
This may cause fire and heat related injuries.
WS-48511

Lenticular Screen and Fresnel Lens Removal

1. Remove the screen assembly shown in the Cabinet Disassembly procedure.
2. Remove the Top, Bottom and Side Screen Holders.
3. Carefully lift the Lenticular Screen and Fresnel Lens combination from the Screen Frame assembly.
Note: When separating the Lenticular Screen from the Fresnel Lens, use caution
while prying the Screen and Lens apart. Use a slot type screw drive, and
remove the pressure sensitive double sided tape.
Page 15

Advertisement

Table of Contents
loading

Table of Contents