TOZO NC7 Quick Start Manual page 4

6.0 Detailed Function List
1. Manually Turn On: After the earbud is in close status, tap and hold the touch control
for 3 seconds and release it, the blue light will turn on.Then looking for the phone with
the last connect connection memory within 10s after the headset is turned on.If it is not
found, enter the pairing state (the red and blue lights flash alternately).
Turn on
2. Auto Turn On: When the earbuds are in the charging case, you can pick it up and it will
automatically turn on. Then finding the phone with the last connect connection memory
within 10s after the earbud is turned on. If it is not found, enter the pairing state ( the red
and blue lights flash alternately ).
1. Manually Turn Off: Tap the MFB touch pannel 5 seconds for turn off in not playing status,
and then release it, the red light will turn off after one second.
Turn off
2. Auto Turn Off: Take the earbuds into the charging case and charge it for 3 seconds,
then the red light will be on to turn off automatically.
TWS After the two earbuds are paired for more than 15 seconds on TWS, if they are not
pairing Timeout
successfully paired, they will enter the mobile phone pairing state.
When the earbuds are turned off, tap and hold the MFB touch pannel simultaneously
for 5 econds and release them to pairing mode (the red/blue light flashes alternately),
thensearching for pairing name"TOZO-NC7" and select it in your mobile phone.
Phone Pairing 1.Take out the 2 earbud from charging base, they will power on automatically and will
connect each other automatically within 10 seconds.
2.The two earbuds flash red and blue alternately(Pairing mode)
3.Search for pairing name"TOZO-NC7" and select it in your mobile phone.
Automatically Turn Off after no connection for more than 5 minutes.
Auto Turn Off After the earbud is disconnected from the phone at a long distance, it will
automatically turn off after more than 5 minutes.(Normal mode)
05
In case reset step not reslove your issue, please restore to factory setting:
1.Pick up two earbuds from charging case, then holding both earbuds button for
5 seconds till red lights on to turn off earbuds.
2. Holding the MFB Touch Pannel on each of earbuds for 5 seconds till blue
Restore Factory
light turn on and off, and then clicking the MFB Touch Pannel on each of
Settings
earbuds 3 times quickly, the Restore Factory Settings process will be done when
the red light.
3.Put earbuds into charging case, and then take them out to connect records of
"TOZO-NC7" on your phone.
NOTE:
After Restore Factory Settings successfully, please delete all connection records of
"TOZO-NC7" on your phone, then research again.
1.Tap the MFB touch pannel for 3 seconds and release to turn on the earbuds→ wait
for a few seconds for the earbuds to automatically interconnect with each other→
wait for a few seconds for the earbuds to connect with the paired phone → the
Turn on for
connection is successful.
re-connection
2.Take out the earbuds from charging case→wait for a few seconds for the earbuds to
automatically interconnect with each other →wait for a few seconds for the earbuds
to connect with the paired phone → the connection is successful.
After the earbud is disconnected from the phone at a long distance, it can automatically
Over distance
reconnect when it returns to the close distance with the phone within 5 minutes. More
for re-connection
than 5 minutes, the headset will automatically turn off.
Answer Phone Call Tap the MFB touch pannel once to answer the incoming call.
Hang up Phone Call Tap and hold the MFB touch pannel for 2 seconds to hand up the phone.
Reject Incoming Call Tap and hold the MFB touch pannel for 2 seconds to reject the incoming call.
Tap and hold the MFB touch pannel for 2 seconds to cancel dialing before dialing out
Cancel dialing
and the other party fails to answer.
EN
06