Cleaning Modes ����������������������������������������������������������������������������������������������16 Serial Number: �������������������������������������� located near the rating label on the underside of Sending Shark ION ROBOT to Charging Dock �������������������������������16 Date of Purchase (Keep receipt): ����������������������� the unit. Store of Purchase: ����������������������������������� Maintaining Your Shark ION ROBOT ����������������������������������������� 17 Emptying the Dust Bin ���������������������������������������������������������������������������������...
Shark ION ROBOT™ with wet hands. 30 DO NOT vacuum up flammable or exposed electrical outlets. 13 DO NOT stand or sit on the Shark ION combustible materials (e.g., lighter fluid, 5 Keep charging dock away from heated gasoline, or kerosene) or use vacuum in ROBOT.
Page 4
However, there is no guarantee 39 Before disposing of the Shark ION ROBOT, that interference will not occur in a particular installation. If this equipment does cause harmful 36 DO NOT charge at temperatures below the battery must be removed.
Dock Spot CLEAN BUTTON “!” ERROR INDICATOR To begin cleaning with your Shark ION When a blockage or a filter problem ROBOT™, press the CLEAN button. occurs, the “!” error indicator light will Press button again to stop.
3 To charge unit directly, plug the charger to the ON position. If all indicator lights remain low, Shark ION ROBOT will automatically return to the charging into a wall outlet, then connect the charger off, then charge the unit directly, using the dock.
With the remote control, you can start and needed. will begin flashing. stop Shark ION ROBOT, select Spot Cleaning 2 Press the UP/DOWN arrows on the mode, send the unit back to the charging dock, and program a cleaning schedule for...
USING YOUR SHARK ION ROBOT™ - continued TIP: Whenever you use the remote control, make sure you point it directly at Shark ION ROBOT, and ensure that Shark ION ROBOT is powered on. Dock Spot Clean Enter SETTING YOUR CLEANING SCHEDULE ON THE REMOTE...
BOTBOUNDARY™ STRIPS You may need to keep Shark ION ROBOT away from certain areas, such as pet bowls, fragile objects, power strips, or doorways. Use the BotBoundary strips to quickly and easily...
MAINTAINING YOUR SHARK ION ROBOT™ WARNING: Wash the dust bin and filter cover STEP 1 STEP 1 STEP 2 STEP 3 with water only. Be sure to air-dry them completely before reassembling. DO NOT wash the filter with water, as it may damage the filter and reduce suction power.
MAINTAINING YOUR SHARK ION ROBOT™ - cont’d� CAUTION: Turn off power before performing any STEP 1 maintenance. NOTE: When cleaning brushroll, be sure to not cut anything other than hair, string, fibers, or other debris. STEP 2 STEP 3 CLEANING THE BRUSHROLL...
MAINTAINING YOUR SHARK ION ROBOT™ - cont’d� CAUTION: Turn off power before performing any maintenance. CLEANING THE REMOVABLE FRONT WHEEL The front caster wheel on your robot is equipped with sensitive sensors and requires cleaning to maintain optimal function. Frequently check the front wheel for any tangled hair or wrapped debris.
STRIPS ™ Your Shark ION ROBOT™ is designed with Smart Sensor technology so it can Use the BotBoundary strips to quickly and easily create “no-go zones” to keep your robot out of the areas you would like it to avoid. These may include: maneuver around obstacles and navigate its way out of tight spaces.
WARNING: Always turn off Power switch before performing any maintenance. The 1-Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja If any error lights are illuminated or flashing on your Shark ION ROBOT , see the error ™...
Need help?
Do you have a question about the ION ROBOT RV720 Series and is the answer not in the manual?
Questions and answers