IMPETUS iT 4500 User Manual page 7

3.
Attach the left console stand support plate (418) to the monitor assembly set and the left
upright tube (301), and tighten it with the screw(#944) M4*8 x (1pcs). Repeat the same
step on the right side.
Press down the monitor as the arrow shown making sure
the monitor is at its right position.
4.Attach the left support tube ornament cover (410) onto the monitor top cover (405) from the
sides <see the big picture shown>. Pre-fix the ornament cover with (#944) M4*8 x (2 pcs), and
do not tighten the screws for now. Repeat the same steps on the right side.
418
Try to adjust the monitor
stand plate with no gap.
944
301
Fix and tighten the
screw (#944) M4*8 x
(1 pcs.) .
405
7
Insert
Before
After