Page 2
IMPRINT: Version: OM_Eversys_e’m_2013-08-05 Index: Release date: 2013-08-05 Created: Florian Christen, ZetaVision Reviewed: Frank Rimpl, Eversys AG Feedback: info@eversys.ch Status: Released Original language: English EVERSYS SA J-P. In-Albon, CEO CP89 Rue du Biais 19 CH - 1957 Ardon Telephone: +41 (0)27 305 25 50 E-Mail: info@eversys.ch...
SUMMARY This manual provides the user with detailed operating instructions for the e'2ct/e’2/e’2m/e’4/e’4m fully automatic coffee machine. The machine operates on two access levels. MANAGER The manager has access to the different product parameters and is authorised to change some settings of the machine. OPERATOR The manager may choose to allow operators access to some specific menu points through authorised access code.
Example: Cleaning the milk container Open the fridge door and remove the milk container. Clean it with a damp cloth. Purpose EVERSYS AG CP89 Rue du Biais 19 CH-1957 Ardon...
GENERAL SAFETY INSTRUCTIONS STRUCTURE The safety instructions in this document are structured as follows: CAUTION Hot Fluids This machine produces hot fluids that could burn or scald the skin, resulting in minor or moderate injury. Avoid direct contact with the skin! Safety signal word Impact of danger Safety symbol...
The safety warning with the signal word “Notice” is used to address prac- tices that could lead to property damage but not to injury. HINTS Hint The hint is used to address practices that help the reader using the machine. General Safety Instructions EVERSYS AG CP89 Rue du Biais 19 CH-1957 Ardon...
GENERAL SAFETY WARNINGS FOR THIS MACHINE DANGER Incorrect Installation The appliance must be installed by an instructed service engineer in com- pliance with the local regulations. The manufacturer is not liable for injuries caused by improper instal- lation of the appliance. DANGER Incorrect Operation The appliance must be serviced by trained personnel only.
Page 11
12 Place the machine on a flat, stable, heat resistant surface. 13 To reduce the risk of electric shock, do not remove or open covers. No user-serviceable parts inside. Refer servicing to qualified personnel only! General Safety Instructions EVERSYS AG CP89 Rue du Biais 19 CH-1957 Ardon...
DISPOSAL PACKAGING MATERIAL The packaging material (cardboard, PE plastic film, PE, PE-foam, EPS) must be disposed of according to the local regulations. REMOVAL OF EQUIPMENT Disconnect the appliance from power. If the appliance is hard-wired, it must be disconnected by an authorised service agent! SAFETY INSTRUCTIONS In order to prevent any accidents caused by inappropriate use or in particular by playing children, the appliance must be put out of...
GENERAL OVERVIEW This picture shows a sample of one coffee machine (e’4) out of the product line. For additional pictures see the product catalogue. Rear bean hopper Steam wand Cleaning ball dispenser Coffee spouts Front bean hopper Grounds drawer Touch screen left Drip tray grid Touch screen right Drip tray...
TOUCH SCREEN FUNCTION BUTTONS General stop button Time Date User guide button User message window Product buttons Menu access point Info button Rinse button Page browse button Touch Screen EVERSYS AG CP89 Rue du Biais 19 CH-1957 Ardon...
START-UP ON/OFF SWITCH The ON/OFF switch is located inside the housing on the right hand side behind the grounds drawer. STANDBY BUTTON To start up the machine from standby/eco mode, the standby button is used. The standby button is located at the bottom right corner of each touch screen.
In order to ensure serving a beverage in a hot cup, always store the cups on the top of the machine. The right hand side of the machine top is heated. Start-Up EVERSYS AG CP89 Rue du Biais 19 CH-1957 Ardon...
FILL THE HOPPERS WITH FRESH BEANS Make sure the beans are always fresh. Lift the cover and fill up the hopper with fresh beans. Bean hopper lever positions: green: unlocked (beans can not enter the grinder) red: locked (beans can enter the grinder) Bean Hopper Levers Make sure that the bean hopper levers are locked (red) when mounting the bean hoppers again.
Re-insert the milk container Turn the refrigerator on by pushing the ON/OFF switch (3) Turn the cup heater on by pushing the ON/OFF switch (4) Close the fridge door Start-Up EVERSYS AG CP89 Rue du Biais 19 CH-1957 Ardon...
USAGE PRODUCT BUTTONS All product buttons are start/stop buttons. A product dispense can always be stopped by pushing the selected button or by pressing the general stop key. General Stop Key The general stop key will stop all running products, as well as from outlet left as from right.
HEATING UP Milk products are prevented from dispensing. The milk product buttons appear grey until the boiler reaches the temperature. Usage EVERSYS AG CP89 Rue du Biais 19 CH-1957 Ardon...
MILK CIRCUIT RINSE After five minutes without milk product dispensing, the machine automatically rinses the milk circuit on the appropriate cof- fee/milk spout. Usage...
Use the powder chute for ONE portion of special coffee (e.g. decaf). Pre-select a powder coffee product (preset) Open the powder chute cover Fill the powder chute with a portion of powder coffee Push “Continue” on the screen Usage EVERSYS AG CP89 Rue du Biais 19 CH-1957 Ardon...
PRODUCT ADJUSTMENTS MANAGER SETTINGS The manager has access to several product parameter to improve product settings like water/milk quantity or coffee aroma. Push the menu access point for at least two seconds. 2s s 2s s s 2s Enter your personal manager password and press return key. Product Adjustments...
Page 33
The manager has now access to the following menus. Product Adjustments EVERSYS AG CP89 Rue du Biais 19 CH-1957 Ardon...
WATER QUALITY Enter the menu “Products & Keys”. Select the product selection button to be set (e.g. Cappuccino) Product Adjustments...
Page 35
When the required water quantity is reached, press the “Learn Water Quantity” again to stop the product dispense. Use the green up/down arrows for the fine adjustments. Test the product by pushing the “Product Test” button. Product Adjustments EVERSYS AG CP89 Rue du Biais 19 CH-1957 Ardon...
COFFEE AROMA Select “Coffee Aroma”. Use the green up/down arrows for the fine adjustments. Increase coffee aroma = stronger coffee taste Decrease coffee aroma = weaker coffee taste Test the product by pushing the “Product Test” button. MILK SEQUENCE Select “Milk Sequence”. Set the desired sequence by activating the touch bar.
Make sure that there are sufficient cleaning balls in the dis- penser. Ensure there are no broken cleaning balls in the new box whilst filling the dispenser. Push the rinse button for at least two seconds. Cleaning EVERSYS AG CP89 Rue du Biais 19 CH-1957 Ardon...
Page 38
Press “Yes” in the pop-up window. Follow the display messages. Appliances with milk products require additional intervention to clean the milk part: Cleaning...
Replace the milk container with the cleaning container. Fill 90 ml Everclean 90 ml Press continue and follow the display messages. Cleaning EVERSYS AG CP89 Rue du Biais 19 CH-1957 Ardon...
Remaining Water After the cleaning procedure, the grounds drawer is filled with water. Empty and clean the grounds drawer! Clean the milk tubes with a damp cloth after the daily cleaning procedure. MONTHLY CLEANING PROCEDURE Unlock, remove and empty the bean hoppers (store beans for re-use).
Order spare cleaning balls at your supplier. RINSE FUNCTION To manually rinse the coffee circuit, push the “rinse” key once. A short rinse cycle will be performed to flush the coffee circuit with hot water. Cleaning EVERSYS AG CP89 Rue du Biais 19 CH-1957 Ardon...
CLEANING BALLS The coffee machine must only be cleaned with the specially designed Eversys cleaning balls which are stored in the cleaning ball dispenser. CAUTION Harmful Substances Eversys cleaning balls contain harmful substances. Swallowing cleaning balls or cleaning solution dispensed during the cleaning procedure could result in minor or moderate injury.
CLEANING THE DRIP TRAY Remove the drip tray grid. Clean the inside of the drip tray and the drip tray grid with a damp cloth. Insert the drip tray grid again. Cleaning EVERSYS AG CP89 Rue du Biais 19 CH-1957 Ardon...
GENERAL SAMPLE Eversys coffee machines are equipped with an internal trouble- shooting and error message system. If action of the operator is required, the info button (warning tri- angle) at the bottom of the touch screen lights up. General Sample...
Page 47
For example: Follow the display message(s) to solve the problem. Use the (<< / >>) keys to browse the different messages if available. General Sample EVERSYS AG CP89 Rue du Biais 19 CH-1957 Ardon...
Page 48
EVERSYS AG CP89 Rue du Biais 19 CH-1957 Ardon...
Need help?
Do you have a question about the E2 and is the answer not in the manual?
Questions and answers