Related Manuals for PotteryBarn LIVINGSTON LARGE DESK
Summary of Contents for PotteryBarn LIVINGSTON LARGE DESK
- Page 1 LIVINGSTON LARGE DESK TOP Date : 16-March-16 www.potterybarn.com Rev : - Page 1 of 4...
- Page 2 Use only vendor supplied hardware to assemble. Using unauthorized hardware could jeopardize the structural integrity of the item. The Livingston Large Desk Top is designed for use with Livingston Left Pedestal & Right Pedestal. Pre-assembly: Remove all parts and hardware from the box and lay out on a clear carpeted or scratch-free work surface, as this will avoid damaging parts during assembly.
- Page 3 1. Attach the Back Panel (B) to the Left and Right Pedestals (C and D) by inserting dowels on the Back Panel (B) to the holes on the Pedestals (C and D) as shown in fig. 1, illustration. 1. 2. Extend the drawers of the pedestal, insert the Allen Bolts (E) through the holes on the side panel of the pedestal into the inserts on the Back Panel (B), then tighten with the Allen Key (F) as shown in fig.
- Page 4 Blot spills immediately and wipe with a clean, damp, cloth. We do not recommend the use of chemical cleansers, abrasives or furniture polish on our lacquered finish. Thank you for your purchase Page 4 of 4 Stores | catalog | www.potterybarn.com...
- Page 5 LIVINGSTON SINGLE DRAWER PEDESTAL LIVINGSTON DOUBLE LATERAL FILE Date : 30-March-16 www.potterybarn.com Rev : - Page 1 of 4...
- Page 6 Important Safety Instructions: Please read all instructions carefully before assembling. For your safety, assembly by two or more adults is strongly recommended. Keep instructions for future use. Use only vendor supplied hardware to assemble. Using unauthorized hardware could jeopardize the structural integrity of the item.
- Page 7 Assembly Instructions: Configuration #1: Livingston Single Drawer Pedestal (A) or Double Lateral File (B) and Livingston Single Top (C) or Double Top (D). To install the Livingston Drawer Pedestal (A) or Double Lateral File (B) with the Tops (C and D), please follow the assembly instruction which is come with the Livingston Single or Double Top (C and D).
- Page 8 4. Align the holes and insert the connector bolts (G & G’) then tighten with a screwdriver (Not Included) as shown in fig. 4, illustration. 4. Illustration. 4 Fig. 4 5. Attach top panel onto the cabinets (Single Drawer Pedestal/Double Lateral File) following the assembly instruction of the Livingston Single Top / Livingston Double Top as shown in fig.
Need help?
Do you have a question about the LIVINGSTON LARGE DESK and is the answer not in the manual?
Questions and answers