Do you have a question about the RPM 40 and is the answer not in the manual?
Questions and answers
Kate
March 2, 2025
No atomizer
1 comments:
Mr. Anderson
May 14, 2025
When the Smok RPM 40 shows "No Atomizer," it means the device cannot detect the coil or pod. This can be caused by poor connection between the coil and the device, a damaged coil, or internal issues with the device.
• The SMOK product must not be offered for sale outside of, independently or separately to, the box or this leaflet. Instruc�ons for safe use •...
Page 3
- Only the verified product can get warranty service. - If you have any ques�ons, please contact SMOK via e-mail, phone or our website to get more help. • Before using this product, please read this leaflet, in full, carefully.
The kit includes: EU Standard Edi�on • 1 x RPM40 Device (1500mAh) • 1 x RPM Standard Pod ( RPM Mesh 0.4Ω Coil Preinstalled) (4.3ml) • 1 x RPM Nord Pod (Nord DC 0.6Ω Coil Preinstalled) (4.5ml) • 1 x USB Cable •...
Instruc�ons on how to fill this product with e-liquid • Before the e-liquid in a SMOK product runs out, add e-liquid into the pod. This should be done before the e-liquid runs out to avoid burning the coil.
Page 6
- is securely a�ached to the e-liquid container itself. - the nozzle is no less than 9mm long. - that the nozzle size is narrower than the filling slot of the SMOK pod to avoid the risk of dermal contact and accidental inges�on of e-liquid. • Filling Instruc�ons...
Page 7
9mm long. - Then check that the nozzle a�ached to an e-liquid refill container can easily connect – and slot into – the SMOK pod. The nozzle a�ached to an e-liquid refill container must be narrower, and smaller in diameter, than the opening in the SMOK pod.
Page 8
Instruc�ons on the coil • A�er dripping e-liquid into a pod with a new coil, please let the pod stand for 15 minutes to avoid the possibility of coil-burning. • Replace coil head. Pull out the pod, and then pull out the old coil and install a new one in the pod.
Instruc�ons on servicing and disposal • This product should be serviced every 12 months by a reputable e-cigare�e dealer. Please retain a copy of your guarantee and provide dealers with the guarantee for servicing. • If this product fails a service, is broken, or otherwise malfunc�ons: do not use this product, and dispose of this product appropriately.
Page 10
Contra-indica�ons for vulnerable groups • This product is not suitable for: - Persons of below 18 years of age. - Persons who are ill or have certain medical condi�ons. - Persons taking certain medica�on. - Persons with certain allergies. • This product is not recommended for use by: - Young people and non-smokers.
Page 11
- You are pregnant or breas�eeding (Nico�ne is able to cross the placental barrier, and presents risk to the unborn child. Nico�ne use in pregnancy should be minimised or avoided altogether. Nico�ne can be excreted in breast milk). - You have CVD, renal or hepa�c impairment, lung disorders or lung condi�ons.
Page 12
This product has been designed and manufactured to deliver nico�ne doses at consistent levels during normal condi�ons of use, over the course of the expected life�me of the SMOK product. Nico�ne delivery per dose will depend on the e-liquid used.
Page 13
Complaints and adverse events Please report complaints or adverse events to: Shenzhen IVPS Technology Co., Ltd. • Address: 101, Building #69, Liantang Industrial Area, Tangwei Community, Fenghuang Subdistrict, Guangming District, Shenzhen, China • Website: www.smoktech.com • Email: support@smoktech.com • Phone number: + 86 755 86347180 Contact details of manufacturer Shenzhen IVPS Technology Co., Ltd.
Need help?
Do you have a question about the RPM 40 and is the answer not in the manual?
Questions and answers
No atomizer
When the Smok RPM 40 shows "No Atomizer," it means the device cannot detect the coil or pod. This can be caused by poor connection between the coil and the device, a damaged coil, or internal issues with the device.
This answer is automatically generated