Table of Contents
Advertisement
Available languages
Available languages
Assembly Instructions and Parts List
Please read and save these instructions. Read carefully before attempting to assemble,
install, operate or maintain the product described. Protect yourself and others by
observing all safety information. Failure to comply with instructions could result in per-
sonal injury and/or property damage! Retain instructions for future reference.
Specifications
Cleaning
Model
Power
PW132000AV 2080
Assembly Instructions
Figure 1
Garden Hose Connection Instructions
1. Attach nipple adapter to inlet fit-
ting on the unit (this may already
be attached to the pump).
2. Attach quick connect fitting to gar-
den hose.
3. Pull side "A" of quick connect fit-
ting toward garden hose and push
onto nipple adapter.
4. Push side "A" of quick connect fit-
ting towards nipple adapter and
release.
2003 Campbell Hausfeld
©
Max Pressure
with
Standard
Maximum
Lance
Capacity
1300 psi
1.6 GPM
For parts, product & service information
visit www.chpower.com
Electric Pressure
Washer
NOTE: REFER TO PRODUCT MANUAL FOR
ALL SAFETY INSTRUCTIONS
Motor
Power
(Single
Phase)
Voltage
14 Amps
Nipple
Adapter
"A"
Figure 2 - Garden Hose Connection
PW132000AV
Maximum
Inlet
Water
Temp.
120V
100˚F
Quick Connect Fitting
Garden Hose
IN462300AV 2/03
Unit
Weight
34 lbs.
Advertisement
Table of Contents
Related Manuals for Campbell Hausfeld PW132000AV
Summary of Contents for Campbell Hausfeld PW132000AV
-
Page 1: Specifications
Retain instructions for future reference. Specifications Max Pressure Cleaning Standard Model Power PW132000AV 2080 1300 psi Assembly Instructions Figure 1 Garden Hose Connection Instructions 1. Attach nipple adapter to inlet fit- ting on the unit (this may already be attached to the pump). -
Page 2: Power Cord
Reset Figure 3 - Grounded plug/reset button www.chpower.com ! IMPORTANT ! This pressure washer is equipped with a microswitch sensitive to water flow. This Instant Start/Stop switch (ISS) senses water flow in the pump. When the trig- ger is released, water stops flowing through the pump. -
Page 3: System Connection
9. While squeezing the trigger, turn the “ON/OFF” switch to the “ON” posi- tion. NOTE: REFER TO PRODUCT MANUAL FOR OPERATING INSTRUCTIONS Power Switch Inlet (See Garden Hose Connection page 1) PW132000AV High Pressure Hose Outlet www.chpower.com... -
Page 4: Replacement Parts List
-Model number -Serial number (if any) -Part description and number as shown in parts list Address parts correspondence to: The Campbell Group / Parts Dept. 100 Production Drive Harrison, OH 45030 U.S.A. PW132000AV Part Number Qty. PM258000SV PM258010SV PM258020SV PM248000AV... -
Page 5: Spécifications
4. Pousser le côté “A” du raccord rapi- de vers le raccordement intermédi- aire et relâcher. 2003 Campbell Hausfeld © Pulvérisateur de Lavage Électrique REMARQUE: SE RÉFÉRER AU MANUEL DU PRODUIT POUR TOUTES LES INSTRUCTIONS DE SÉCURITÉ... - Page 6 “ON/OFF” (MARCHE/ ARRÊT) est dans la position “ON” (EN MARCHE). Toujours pointer le pistolet dans une direction hors de danger. Appelez 1-800-330-0712 pour le Service Technique 6 Fr PW132000AV Toujours tourner l’interrupteur Risque de dommage à Risque d’injection. Le modèle pulvéris-...
- Page 7 9. En serrant la gâchette, tourner l’in- terrupteur “ON/OFF” à la position“ON” (sous tension). REMARQUE: SE RÉFÉRER AU MANUEL DU PRODUIT POUR LES INSTRUCTIONS D’OPÉRATION Interrupteur Pistolet Général Entrée (Voir la connexion pour le tuyau à la page 1) 7 Fr PW132000AV Tuyau Haute Sortie Pression...
- Page 8 -Numéro de Série (si applicable) -Description et numéro de la pièce indiqués sur la liste de pièces de rechange Correspondance: The Campbell Group / Parts Dept. 100 Production Drive Harrison, OH 45030 U.S.A. 8 Fr PW132000AV No de Pièce Qté. PM258000SV PM258010SV PM258020SV PM248000AV...
- Page 9 Especificaciones Presión Máx Poder de on lanza Modelo limpieza estándar PW132000AV 546,80 89,64 bar Instrucciones de Montaje Figura 1 Conexión de la Manugera de Jardín 1. Inserte el adaptador de manguito en la conexión de entrada de la unidad (es posible que ya esté conectado a la bomba).
-
Page 10: Operación
Siempre apunte la pistola hacia una posi- cion segura. Llame al 1-800-330-0712 para Servicio Técnico (sólo en los Estados Unidos) 10 Sp PW132000AV Ponga siempre el interruptor "ON/OFF" Riesgo de daño al equipo. Siempre Peligro de inyeccion. La unidad comenzara... - Page 11 9. Con el gatillo apretado, gire el inter- ruptor “ON/OFF” en la posición “ON”. NOTA: LAS INSTRUCCIONES DE FUN- CIONAMIENTO SE ENUMERAN EN EL MANUAL DEL PRODUCTO. Pistola Interruptor Entrada (Vea la conexión de la manguera en página 1) 11 Sp PW132000AV Manguera de alta presión Salida...
- Page 12 -Descripción y número del repuesto, según se indica en la lista de repuestos. Dirija su correspondencia sobre repuestos a: The Campbell Group / Parts Dept. 100 Production Drive Harrison, OH 45030 U.S.A. 12 Sp PW132000AV Número del Repuesto Ctd. PM258000SV PM258010SV PM258020SV...
Need help?
Do you have a question about the PW132000AV and is the answer not in the manual?
Questions and answers