Safety Rules - Ductile Iron - Case 580N Service Manual

Safety rules - Ductile iron

DANGER
Altering cast ductile iron can cause it to weaken or break.
Before you weld, cut, or drill holes on any part of this machine, make sure that the part is not cast
ductile iron.
Failure to comply will result in death or serious injury.
Altering cast ductile iron can cause it to weaken or break. Unauthorized modifications to cast ductile iron parts can
cause death or serious injury. Do not weld, cut, drill, repair, or attach items to cast ductile iron parts on this machine.
Before you weld, cut, or drill holes on any part of this machine, make sure the part is not cast ductile iron. See your
dealer if you do not know if a part is cast ductile iron.
The following items are examples of cast ductile iron parts. There may also be other parts made of cast ductile
iron that are not on the list below.
• two-wheel drive steering link
• dump links
• front axle
• stabilizers
• extend-a-hoe
• swing tower
• bucket linkage
• Air-Conditioning (A/C) compressor mounting bracket
Do not make any unauthorized modifications. Consult an authorized dealer before making any changes, additions,
or modifications to this machine.
INTRODUCTION
48194558 20/10/2017
7
D0148A