Advertisement
Play music from an external
device
Turn the speaker on and press SOURCE
button to select AUX mode.
Connect a 3.5mm to 2-RCA adapter
audio cable with the connector on the
device:
the AUX in RCA socket on the
speaker.
the headphone jack on the device
(MP3 player, cellphone, iPad, or other
audio players).
Play audio on the device (refer to its
user manual).
Change the speaker light effect
Turn the speaker on, and shor t press the
composite LIGHT/PAIR button on top panel
or remote control to change the speaker light
mode:
Rhythmic light 01/ Rhythmic light 02/ Breathe
flashing light 03 /Light off.
When the batter y level or batter y power is
less than 30%, the batter y symbol on LED
display will blink; when lower than 10%, there
will be a prompt tone. You need to connect
the AC power cord to the AC IN socket on
the rear panel of the unit and the power outlet.
LED indicator is solid red when it is charging,
and it will turn solid green when the batter y is
fully charged. When your phone is connected
to the speaker via Bluetooth, you could see the
batter y power symbol on the phone.
Advertisement
