Yamaha DRIVE2 AC 2019 Owner's/Operator's Manual page 51

J0E
MAINTENANCE
Adjusting a Headlight
NOTICE
It is recommended to have the
headlight adjustment performed
by a Yamaha dealer.
TIP
The screw can be accessed from
under the fender.
1. Using a Phillips head
screwdriver, turn the adjusting
screw 1.
2. Turning the screw clockwise will
lower the beam and turning the
screw counter-clockwise will
raise the beam.
Y-2770
Replacing a Taillight
Bulb
1. If a taillight bulb burns out,
replace the bulb assembly 1 by
removing the rubber grommet 2
from the bezel assembly 3.
2. Remove the wire connector,
replace the bulb, and reinstall by
fitting the rubber grommet 2
over the bulb assembly 1 and
bezel 3.
Y-2771
1
2
3
4
5
6
7
8
9
10
11
8-24