Overview; Installing Drivers And Utilities - Pentagram horNET Wi-Fi USB Installation And Operation Manual

Overview

The status LED indicator of the wireless adapters is described in the following.
LED Status
LNK/ACT Off
LNK/ACT On
LNK/ACT Flashing

Installing drivers and utilities

1. Do not connect the adapter to your computer.
2. Insert the driver and utility CD into the CD-ROM drive.
3. The setup wizard will launch automatically (under Windows Vista, you may additionally
need to select Run: Autorun.exe in the Autorun window). If the CD-ROM autorun feature
is disabled, run Autorun.exe in the CD's root directory.
4. Click Install PENTAGRAM horNet for your adapter. If you are using Windows Vista, the
User Account Control window may display. To proceed with the installation, click
Continue (if you are performing the installation using an account that has no
administrative privileges, you may also need to enter the user name and password for an
administrative account).
5. Select I accept the terms of the license agreement and click Next >.
6. If you wish to install the driver with utility software (recommended), select Install driver
and Ralink WLAN Utility. If you wish to install the driver only, click Install driver only.
Click Next >.
7. If you wish to use the software included with the adapter (recommended), select Ralink
Configuration Tool and click Next >. If you wish to use your system's wireless network
wizard, select Microsoft Zero Configuration Tool and click Next >.
8. Click Install to install the driver and configuration utility.
PENTAGRAM horNET Wi-Fi USB P 6132-08
Action
No wireless network connection.
Wireless network connection established.
Looking for a wireless network/transmitting data.
6