Evacuating In Case Of Fire - Hitachi ZW 550-6 Operator's Manual

Check Key Switch:
 If a fire breaks out, failure to stop the engine will escalate
the fire, hampering fire fighting.
Always check key switch function before operating the
machine every day:
1. Start the engine and run it at low idle.
2. Turn the key switch to the OFF position to confirm that
the engine stops.
 If any abnormalities are found, be sure to repair them
before operating the machine.
Check Heat Shields:
 Damaged or missing heat shields may lead to fires.
 Damaged or missing heat shields must be repaired or
replaced before operating the machine.
 If hydraulic hoses are broken while the engine cover is
open, splattered oil on the high temperature parts such
as mufflers may cause fire. Always close the engine cover
while operating the machine.

Evacuating in Case of Fire

 If a fire breaks out, evacuate the machine in the following
way:
 Stop the engine by turning the key switch to the OFF
position if there is time.
 Use a fire extinguisher if there is time.
 Exit the machine.
 If the cab doors do not open, break them with a hammer
to make an escapeway.
 In an emergency, if the cab door can not be opened,
break the front or rear window panes with the emergency
evacuation hammer to escape from the cab. Refer to the
explanation pages on the Emergency Evacuation Method.
SAFETY
S-30
SA-393
SS-1510