Download Print this page
Sealey APMS81 Instructions

Sealey APMS81 Instructions

Modular 2 door cabinet with worktop

Advertisement

Quick Links

thank you for purchasing a Sealey product. manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
refer to
Wear protective
instructions
gloves
1. Safety
1.1.
General Safety
warninG! use the cabinet on level and solid ground, preferably concrete. Avoid tarmacadam since the cabinet may sink into the
surface.
locate the cabinet in a suitable working area.
9
Keep the cabinet clean and tidy in accordance with good workshop practice.
9
Keep children and unauthorised persons away from the work area.
9
take care of sharp edges when assembling.
9
do not use the cabinet for any purpose other than that for which it is designed.
8
do not use the cabinet outside.
8
do not get the cabinet wet or use in damp or wet locations or areas where there is condensation.
8
do not clean the cabinet with any solvents which may damage the surfaces.
8
2. introduction
Modular storage system ideal for any garage or workshop. Can be easily adjusted and upgraded to suit specific needs. Purchase a
simple base cabinet or create a custom storage system.
standard features include:
• Ball bearing drawer slides throughout.
• Base cabinets are supplied with a worktop as standard.
• Floor cabinets feature adjustable shelves.
• Each unit is supplied with a lock and two keys.
• Supplied flat packed and will require some simple assembly.
• Two door floor and wall cabinets feature perforated pegboard panels on the inside of the doors.
3. Specification
model no. ........................................................ APMS81
overall size (W x d x H) .................665 x 460 x 820mm
4. contentS
© Jack sealey limited
instructions for
modular 2 door cabinet with worktop
665mm
model no:
Wear safety
footwear
Original Language Version
apmS81
shelf weight limit .................................................... 18kg
cabinet weight limit ................................................ 72kg
APMS81 | Issue 1 08/02/18

Advertisement

loading

Summary of Contents for Sealey APMS81

  • Page 1 Sealey product. manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
  • Page 2 Step 3 Assemble cabinet frame fit side supports x 4 Step 2 Step 4 fit door pivots fit sides Step 5 fit internal supports. fit cabinet top. Square the cabinet frame. Make sure the measurements from corner to corner are equal before completely tightening the bolts. L1 = L2 Step 6 Original Language Version APMS81 | Issue 1 08/02/18 © Jack sealey limited...
  • Page 3 Step 7 Step 8 fit worktop fit side wall to top, shelf and bottom bolts Step 9 Original Language Version APMS81 | Issue 1 08/02/18 © Jack sealey limited...
  • Page 4 Sealey Group, kempson way, Suffolk business park, bury St edmunds, Suffolk. ip32 7ar 01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk...