Introduction To Sign Cut Pro 2; Installing Signcut; Sign Cut Screens - Skycut C Series Manual

Calibrate and use camera for print
and cut applications: Chapter 3
Set end-of-cut options: Section
2.06
Settings for: LED, Units,
Language, Screensaver, Alarm:
Section 1.14.2
1.11 Introduction to SignCut Pro 2

1.11.1 Installing SignCut

•
SignCut Pro 2 can be downloaded from the following link:
•
In some cases, a virus protection software may warn users that there are potentially dangerous files. It is
perfectly safe to install this program so temporary changes or disabling of your virus protection program may
be required. After installing SignCut Pro 2, you can reestablish your virus protection.
•
The program can be used without purchase for three weeks, as long as SignCut2 has not been previously
installed on that computer.
•
Note that three programs will be installed: SignCut Pro 2 (the program you will use for cutting), SignCut
Draw (a program you can use for designing – PC version only) and, optionally, SignCut Spooler (a program
you can use for managing completed jobs). You can also import a range of vector file formats into SignCut
Pro 2 if you prefer to design in a different vector program.
•
Unlike prior versions of SignCut, license numbers are not used. For identification of your registration, an
Alias name is used which appears in the Title Bar. To change your Alias:

Go to Account>My Account and click on My Signcut (left side).

You will then see an Edit Alias button to click which will open a window where you can enter a new
Alias. Click on Save.

Close and reopen SignCut Pro 2. Your name Alias name should now appear in the Title Bar.

1.11.2 Sign Cut Screens

•
The following screenshots provide labels for the various parts of SignCut Draw and Sign Cut Pro. It's
worthwhile noting the names of these parts as they will be referenced throughout this user manual.
https://signcutpro.com/#download-section
Set up wireless connection to home
or office network: Section 1.12.2
Array setup, Scale, and options for
display and cutter behavior: Section
1.14.2
Version numbers, software
selection, reset: Section 1.14.3
14