Connecting A Subwoofer; Wall-Mounting - Vizio M51a-H6 User Manual

Connecting a Subwoofer

The subwoofer has already been paired with the sound bar by VIZIO. However, the subwoofer may need to be
re-linked to the sound bar if there is no sound coming from the subwoofer.
1
Surrounds
L R
AC IN
AC IN Surrounds ON / OFF
L R
Back of subwoofer
First confirm that the power LED is illuminated.
Press and hold the ON/OFF button on the back of
the subwoofer for 5 seconds. The LED on the back
of the subwoofer will begin to blink.
ENG - 32
What does pairing mean?
Pairing means to wirelessly connect.
2
ON / OFF
Button Located at the Top of Sound Bar
Press and hold the Power button on the top of the
sound bar for 5 seconds. The LED indicators on the
front will flash 3 times. The subwoofer is now linked
with the sound bar.
1 Place the included wall mounting template against the wall under your TV.
Mark the two bracket holes using a pencil.
WALL MOUNTING TEMPLATE
LEAVE THIS SPACE BETWEEN THE SOUND BAR AND YOUR TV
MARK HERE
Refer to the "Wall-mounting" section in the User Manual for additional information
Then place the shorter end of the bracket on the two holes you just marked and screw into
2
the wall. Be sure your screws are attached to wood studs, drywall anchors (for drywall), or
concrete anchors (for brick/concrete walls).
Screws for attaching the bracket to the wall are
not included. Choose the screw type and length
appropriate to your home's construction. If in doubt,
consult a professional installer.
* Do not use any of the included screws for the wall mount installation. These are not intended for mounting.

Wall-mounting

940±2mm
Bracket Screw *
NOT INCLUDED WITH SOUND BAR
8.58"/ 21,80 cm
Center Line Wall Mount Screw
Screw Size: M4 x 12L
MARK HERE (Included with sound bar)
Bracket Screw
*
(Not included with sound bar)
Suggested screw size: 3.5 mm diameter,
1.63" minimum length
ENG - 33