Table of Contents
Advertisement
Preparing your device
A Nano-SIM card provided by your carrier is required in order to use cellular services
microSD card is required to store data.
Install the Nano-SIM cards and the microSD card as shown
Step 1.
Insert the eject tool that comes with your device into the hole in the card tray.
Step 2.
Pull out the card tray and do one of the following:
Position a Nano-SIM card in Slot 1 and a microSD card in Slot 2;
Position a Nano-SIM card in Slot 1 and another Nano-SIM card in Slot 2
Step 3.
Carefully insert the tray with the installed cards back into the slot.
① Only Nano-SIM cards work with your device.
② Always turn off your smartphone first before you insert or remove a Nano-SIM
card. Insert or remove a Nano-SIM card with your device on may damage your
Nano-SIM card or smartphone permanently.
③ Both of the card slots support 4G/3G/2G data services, but you can enable only
one Nano-SIM card for data connection at a time. If you want to change the
Nano-SIM card used for data connection, go to Settings > SIM management.
②
.
①
. A
③
.
Advertisement
Table of Contents
