Displaying A User Pattern - Leader LT 4610 Instruction Manual

17.3.4

Displaying a User Pattern

This section describes the procedure for displaying a user pattern from the LT 4610 storage
memory.
In this example, the user pattern file name is "LEADER.bmp," and the format is 4K.
1. Select the display memory from INT_1 to INT_8.
If a user pattern has already been transferred to the display memory, the selected user
pattern is displayed. If no user pattern has been transferred, you need to transfer a
pattern from the storage memory to the display memory.
How to save the user pattern to the storage memory, see 17.3.7, "Copying a User
Pattern to the LT 4610" and 17.3.9, "Copying Patterns from the Archive."
The format is automatically set to SD, HD (2K), 4K (2SI), or 4K (SQD) according to the
selected SDI format. The format is displayed as SD, 2K, 2SI, or SQD at the upper right
of the USER PATTERN menu.
Therefore you need to select the SDI format before you select the user pattern.
[See also]
４．ＵＳＥＲ ＰＡＴＴＥＲＮ １ ２ＳＩ
＊ＩＮＴ１ ＬＥＡＤＥＲ．ｂｍｐ
Procedure
12G OPTION → SDI 1 → PATTERN → PATTERN SELECT → USER PATTERN
2. Select the storage memory from 001 to 025.
When the file in the selected display memory matches that in the storage memory, see
step 3.
When the file in the selected display memory does not match that in the storage
memory, see step 4.
The format is automatically set to SD, HD (2K), 4K(2SI), or 4K(SQD) according to the
selected SDI format. The format is displayed as SD, 2K, 4K(2SI), or 4K(SQD) at the
upper right of the USER PATTERN menu.
５．ＵＳＥＲ ＰＡＴＴＥＲＮ １ ２ＳＩ
００１ ＬＥＡＤＥＲ．ｂｍｐ
17. 12G OPTION MENU (SER02)
17.3.5, "Selecting a User Pattern", 17.3.7, "Copying a User Pattern to the LT 4610",
17.3.9, "Copying Patterns from the Archive"
154