Play Audio Through Bluetooth; Auto Standby; Apply Factory Settings; Update Software - Philips 5000 Series User Manual

Play audio through
Bluetooth
Through Bluetooth, connect the SoundBar
with your Bluetooth device (such as an
iPad, iPhone, iPod touch, Android phone,
or laptop), and then you can listen to the
audio files stored on the device through
your SoundBar speakers.
What you need
• A Bluetooth device which supports
Bluetooth profile A2DP and AVRCP,
and with Bluetooth version 4.2 or
above.
• The operational range between the
SoundBar and a Bluetooth device is
approximately 4 meters (13 feet).
1
Press BT on the remote control to switch
the SoundBar to Bluetooth mode.
The soundbar's indicator blinks
blue.
2
On the Bluetooth device, switch on
Bluetooth, search for and select Philips
TAB5305 to start connection (see the
user manual of the Bluetooth device
on how to enable Bluetooth).
During connection, the soundbar's
indicator blinks blue.
3
Wait until the soundbar's indicator
becomes solid blue.
If the connection fails, the indicator
blinks continually at a lower rate.
4
Select and play audio files or music on
your Bluetooth device.
• During play if a call is coming,
music play is paused.
• If your Bluetooth device supports
AVRCP profile, on the remote
control you can press
to skip to a track or press
pause/resume play.
5
To exit Bluetooth, select other source.
• When your switch back to
Bluetooth mode, Bluetooth
connection remains active.
Note
• The music streaming may be interrupted
by obstacles between the device
and Sound Ban such as wall, metallic
casing that covers the device, or other
devices nearby that operate in the same
frequency.
• If you want to connect your SoundBar
wrth another Bluetooth device, press
and hold BT on the remote control to
disconnect the currently connected
Bluetooth device.

Auto standby

When playing media from a connected
device, this product automatically
switches to standby after 15 minutes of
button inactivity and no audio play from a
connected device.

Apply factory settings

You can reset your SoundBar to the default
setting mode.
1
In AUX mode, long press the power key
of the remote control for 5 seconds.

Update software

To continually improve the product,
software upgrade may be offered. Visit
www.philips.com/support to check if the
latest software version is available.
to
The factory settings is restored.
EN 11